Show simple item record

contributor authorLee Saeil;Kim Taehyoun;Srivastava Shashank
date accessioned2019-02-26T07:31:58Z
date available2019-02-26T07:31:58Z
date issued2018
identifier other%28ASCE%29AS.1943-5525.0000805.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4247658
description abstractIn this work, to demonstrate the efficiency of model reduction in design optimization, a parametric reduced-order model (PROM) was adopted in conjunction with an aeroelastic optimization process. Flutter speed was chosen as an objective function, and structural properties (material density, Young’s modulus, and Poisson’s ratio) as well as fluid properties (air density) were defined as the design variables. The flutter calculation was performed for a Goland wing, using finite-element modeling for the structure and the vortex lattice method for the aerodynamic part. A gradient-based optimization technique and a global optimization method were used to seek a maximum flutter speed. Comparison of optimization results from the full-order model (FOM) and PROM shows that the proposed optimization process yields the same optimum flutter speed as the FOM and yet reduces the computation time significantly, by up to a factor of four.
publisherAmerican Society of Civil Engineers
titleEfficiency Enhancement of Aeroelastic Optimization Process Using Parametric Reduced-Order Modeling
typeJournal Paper
journal volume31
journal issue2
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000805
page4018004
treeJournal of Aerospace Engineering:;2018:;Volume ( 031 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record