Show simple item record

contributor authorA. Meurisse
contributor authorJ. C. Beltzung
contributor authorM. Kolbe
contributor authorA. Cowley
contributor authorM. Sperl
date accessioned2017-12-30T13:03:06Z
date available2017-12-30T13:03:06Z
date issued2017
identifier other%28ASCE%29AS.1943-5525.0000721.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4245041
description abstractThe authors investigate mechanical properties of sintered lunar regolith. Using JSC-1A and DNA lunar simulants, they study the influence of changes in glass content, main plagioclase series, and ilmenite content on a defined sintering process and on the mechanical properties of resulting sintered samples. Ilmenite addition up to 20 wt% of the regolith showed a negligible effect on the sintered product. The anorthite plagioclase endmember cannot be replaced by albite, responsible for the low sintering temperature of DNA and covering up the effect of the glass phase. The vacuum environment was revealed to have a positive effect on JSC-1A sintering: the grains bond at lower temperature than in air, thus preventing the formation of additional porosity and increasing the compression strength up to 152 MPa compared with only 98 MPa for sintering JSC-1A in air.
publisherAmerican Society of Civil Engineers
titleInfluence of Mineral Composition on Sintering Lunar Regolith
typeJournal Paper
journal volume30
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000721
page04017014
treeJournal of Aerospace Engineering:;2017:;Volume ( 030 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record