Show simple item record

contributor authorP. H. Pedreira
contributor authorJ. R. Lauretta
contributor authorS. D’hers
date accessioned2017-12-30T13:03:03Z
date available2017-12-30T13:03:03Z
date issued2017
identifier other%28ASCE%29AS.1943-5525.0000697.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4245028
description abstractOrbital maneuvering of microsatellite and nanosatellite requirements can be efficiently addressed by planar nozzles, in which real-time thrust control is gained actuating on the nozzle throat area. In the present work, the method of characteristics is used to design a hypersonic contour; then, the resulting profile is laser cut, assembled, and built into a propulsion system to finally perform tests in a vacuum chamber under several working conditions. Results are used to validate the profile and modeling assumptions and investigate overall behavior. Tests showed that thrust-inlet pressure ratio is a linear function of separation between nozzle contours and that no additional losses are introduced in the system. The corresponding design/manufacture/assembly tools can be used to a provide low-cost/low-weight controllable propulsion systems to the small-satellite industry with no efficiency loss.
publisherAmerican Society of Civil Engineers
titlePlanar Nozzles for Controllable Microthrusters
typeJournal Paper
journal volume30
journal issue3
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000697
page06016007
treeJournal of Aerospace Engineering:;2017:;Volume ( 030 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record