Show simple item record

contributor authorQiliang Zhang
contributor authorZengqiang Cao
contributor authorFayuan Wei
contributor authorDong Mu
contributor authorYangjie Zuo
date accessioned2017-12-30T13:02:32Z
date available2017-12-30T13:02:32Z
date issued2016
identifier other%28ASCE%29AS.1943-5525.0000592.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244913
description abstractInterference fit can lead to better fatigue behavior of mechanical fastened joints. To explore the fatigue enhancement mechanism of interference fit, an analytical model of an interference-fit pinned sheet under subsequent tensile loading is presented. This model is employed to correlate the bypass load with the external longitudinal tensile load of the sheet, and the range of the two forces. Three-dimensional (3D) finite element (FE) analysis is performed using ABAQUS and comparison between the results of the two models shows a good agreement. Analytical results reveal that the key to the reduction of the bypass load amplitude lies in the elastic deformation of connected members of interference-fitted joints and the contact between them. This effect is accomplished through the automatic adjustment of the contact at the interfaces of the pin and sheet. For a specific joint, the effective affecting range (EAR) of interference for external loading is dependent on the interference and stiffness of its members. Specifically, the bypass load amplitude can be reduced only when external loads intersect EAR with a nonempty subset. If exerted loads are entirely within EAR, the bypass load amplitude can be minimized and the reduction ratio depends solely upon the stiffness of the connected members. It is also concluded that taking into consideration the external loads, especially its maximum value, is essential in the optimizing of interference. Finally, the optimum interference is deduced via the analytical model.
publisherAmerican Society of Civil Engineers
titleMechanical Analysis of a Pin Interference-Fitted Sheet under Tensile Loading
typeJournal Paper
journal volume29
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000592
page04015085
treeJournal of Aerospace Engineering:;2016:;Volume ( 029 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record