Show simple item record

contributor authorAndris Slavinskis
contributor authorHendrik Ehrpais
contributor authorHenri Kuuste
contributor authorIndrek Sünter
contributor authorJaan Viru
contributor authorJohan Kütt
contributor authorErik Kulu
contributor authorMart Noorma
date accessioned2017-12-30T12:59:55Z
date available2017-12-30T12:59:55Z
date issued2016
identifier other%28ASCE%29AS.1943-5525.0000504.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244347
description abstractThis paper presents the characterization and in-orbit validation of the ESTCube-1 attitude determination system (ADS). ESTCube-1 is a one-unit CubeSat built by students and launched on May 7, 2013, to a Sun-synchronous, 700-km, polar low Earth orbit. Its primary mission is to centrifugally deploy a tether as a part of the first in-orbit demonstration of electric solar wind sail (i.e., E-sail) technology. The ADS uses magnetometers, gyroscopic sensors, Sun sensors, and an unscented Kalman filter for attitude determination. Here the performance of commercial off-the-shelf (COTS) sensors and results from tuning the system is shared; recalibration, software, and Kalman filter adjustments. The system is validated by comparing the attitude determined by the on-board ADS with the attitude determined from on-board camera images. Uncertainty budgets for both attitude determination methods are estimated. The expanded uncertainty of comparison (95% confidence level, k=2) is 1.75° and the maximum difference between attitudes determined by both methods is 1.43°.
publisherAmerican Society of Civil Engineers
titleFlight Results of ESTCube-1 Attitude Determination System
typeJournal Paper
journal volume29
journal issue1
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000504
page04015014
treeJournal of Aerospace Engineering:;2016:;Volume ( 029 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record