Show simple item record

contributor authorS. Traficante
contributor authorM. G. De Giorgi
contributor authorA. Ficarella
date accessioned2017-12-30T12:59:13Z
date available2017-12-30T12:59:13Z
date issued2016
identifier other%28ASCE%29AS.1943-5525.0000539.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244191
description abstractThe effects of active separation control on a highly loaded subsonic compressor stator cascade were numerically studied by comparing the behavior of different devices: continuous jet actuator (CJA), zero-net mass-flux synthetic jet actuator (SJA), and plasma actuator (PA). For the jet actuator modeling, a suction/blowing type boundary condition was used, imposing a time-constant velocity for the CJA case and a prescribed sinusoidal time-varying velocity for the SJA case. For the PA case, the body force, which represents the effect of the plasma actuator on the flow, was added to the momentum equations in the computational fluid dynamics (CFD) code. The PA is slightly more efficient for the reduction of flow separation in the region just downstream of the blade actuators. However, at the same mechanical power delivered by the actuator to the fluid, the SJAs are more advantageous than the CJAs and slightly outperform plasma actuator application from the pressure loss reduction and pressure rise viewpoints. The fluidic jets have low power requirements, whereas the power consumption would be prohibitive for the PA configuration that shows low fluid mechanic efficiency.
publisherAmerican Society of Civil Engineers
titleFlow Separation Control on a Compressor-Stator Cascade Using Plasma Actuators and Synthetic and Continuous Jets
typeJournal Paper
journal volume29
journal issue3
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000539
page04015056
treeJournal of Aerospace Engineering:;2016:;Volume ( 029 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record