Show simple item record

contributor authorEiland
contributor authorRichard;Edward Fernandes
contributor authorJohn;Vallejo
contributor authorMarianna;Siddarth
contributor authorAshwin;Agonafer
contributor authorDereje;Mulay
contributor authorVerrendra
date accessioned2017-12-30T11:44:07Z
date available2017-12-30T11:44:07Z
date copyright9/7/2017 12:00:00 AM
date issued2017
identifier issn1043-7398
identifier otherep_139_04_041005.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242988
description abstractComplete immersion of servers in dielectric mineral oil has recently become a promising technique for minimizing cooling energy consumption in data centers. However, a lack of sufficient published data and long-term documentation of oil immersion cooling performance make most data center operators hesitant to apply these approaches to their mission critical facilities. In this study, a single server was fully submerged horizontally in mineral oil. Experiments were conducted to observe the effects of varying the volumetric flow rate and oil inlet temperature on thermal performance and power consumption of the server. Specifically, temperature measurements of the central processing units (CPUs), motherboard (MB) components, and bulk fluid were recorded at steady-state conditions. These results provide an initial bounding envelope of environmental conditions suitable for an oil immersion data center. Comparing with results from baseline tests performed with traditional air cooling, the technology shows a 34.4% reduction in the thermal resistance of the system. Overall, the cooling loop was able to achieve partial power usage effectiveness (pPUECooling) values as low as 1.03. This server level study provides a preview of possible facility energy savings by utilizing high temperature, low flow rate oil for cooling. A discussion on additional opportunities for optimization of information technology (IT) hardware and implementation of oil cooling is also included.
publisherThe American Society of Mechanical Engineers (ASME)
titleThermal Performance and Efficiency of a Mineral Oil Immersed Server Over Varied Environmental Operating Conditions
typeJournal Paper
journal volume139
journal issue4
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4037526
journal fristpage41005
journal lastpage041005-9
treeJournal of Electronic Packaging:;2017:;volume( 139 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record