Show simple item record

contributor authorOnur Son
contributor authorOksan Cetiner
date accessioned2017-12-16T09:22:17Z
date available2017-12-16T09:22:17Z
date issued2017
identifier other%28ASCE%29AS.1943-5525.0000765.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4241978
description abstractThree-dimensionality effects have been investigated for a flat plate undergoing an impulsive pitch-up motion in a large-scale, free-surface water channel with the presence and absence of an endplate to represent a symmetry plane and to prevent free-surface effects. To obtain the same aspect ratios without using the endplate, appropriately sized wings were also used in a fully submerged arrangement. The velocity fields were acquired in the near wake of the flat plate using a two-dimensional (2D) two-component digital particle image velocimetry system, and simultaneous force measurements were performed. The wing had an aspect ratio ranging from 2 to 8 and pitches up to 45° in 1 or 6 convective times. The force measurement results revealed that major difference occurred after the motion was completed in which the lift and drag forces exhibited a local increase and decrease. Interactions between leading edge, trailing edge, and tip vortices were investigated; flow structures were correlated with the force-time histories, and variations with aspect ratio were also addressed.
publisherAmerican Society of Civil Engineers
titleThree-Dimensionality Effects due to Change in the Aspect Ratio for the Flow around an Impulsively Pitching Flat Plate
typeJournal Paper
journal volume30
journal issue5
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000765
treeJournal of Aerospace Engineering:;2017:;Volume ( 030 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record