| description abstract | Along its lifetime, an offshore unit is subjected to several equipment interventions. These modifications may include large conversions in loco that usually are not adequately documented. Hence, the accurate determination of the platform's center of gravity (KG) is not possible. For vessels with low metacentric height (GM), such as semisubmersibles, Classification Societies penalize the platform's KG, inhibiting the installation of new equipment until an accurate measurement of KG is provided, i.e., until an updated inclining test is performed. For an operating semisubmersible, the execution of this type of test is not an alternative because it implies in removing the vessel from its in-service location to sheltered waters. Relatively recently, some methods have been proposed for the estimation of KG for in-service vessels. However, as all of the methods depend on accurate measurements of inclination angles and, eventually, on numerical tools for the simulation of vessel dynamics onboard, they are not straightforward for practical implementation. The objective of the paper is to present a practical methodology for the experimental determination of KG, without the need of accurate measurements of inclinations and/or complex numerical simulations, but based on actual operations that can be performed onboard. Indeed, the proposed methodology relies on the search, identification, and execution of a neutral equilibrium condition where, for instance, KG = KM. The method is exemplified using actual data of a typical semisubmersible. The paper also numerically explores and discusses the stability of the platform under various conditions with unstable initial GM, as well as the effect of mooring and risers. | |
