Show simple item record

contributor authorYaar, Ilan
contributor authorHakmon, Rony
contributor authorHalevy, Itzhak
contributor authorBar-Ziv, Ronen
contributor authorVainblat, Noah
contributor authorIflach, Yacov
contributor authorAssulin, Maor
contributor authorAvraham, Tzipora
contributor authorKaminski, Michael D.
contributor authorStilman, Terry
contributor authorSerre, Shannon
date accessioned2017-11-25T07:18:41Z
date available2017-11-25T07:18:41Z
date copyright2017/25/5
date issued2017
identifier issn2332-8983
identifier otherners_003_03_030909.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235328
description abstractOne of the preparation steps for a possible radiological attack is the capability of fast and effective decontamination of critical infrastructure. This study describes the implementation of a test plan at an intermediate scale (between bench scale and large scale or wide area) to evaluate decontamination procedures, materials, technologies, and techniques for removal of radioactive material from various surfaces. Two radioisotopes were tested: cesium-137 (137Cs) and the short-lived simulant to 137Cs, rubidium-86 (86Rb). Two types of decontamination hydrogel products were evaluated: DeconGel™ and Argonne SuperGel. Tests were conducted at the assigned Chemical, Biological, Radiological, and Nuclear (CBRN) Israel Defense Forces (IDFs) Home Front Command facility, and at the Nuclear Research Center Negev (NRCN), Israel. Results from these tests indicated similar removal and operational parameters for 86Rb and 137Cs, as expected from the chemical similarity of both elements. These results proved that the short-lived radioisotope 86Rb can be used in future experiments to simulate 137Cs. Results and conclusions from these experiments are presented and compared to results from laboratory-scale experiments performed on small coupons. In general, both hydrogel decontamination products may be used as a viable option to decontaminate large surfaces in a real-world event, removing between 30% to 90% of the contamination, depending on the surface type and porosity. However, both products may leave behind absorbed contamination that will need to be addressed at a later stage. Yet, the likelihood of resuspension through use of these products is reduced.
publisherThe American Society of Mechanical Engineers (ASME)
titleEvaluation of Hydrogel Technologies for the Decontamination of 137Cs From Building Material Surfaces
typeJournal Paper
journal volume3
journal issue3
journal titleJournal of Nuclear Engineering and Radiation Science
identifier doi10.1115/1.4036458
journal fristpage30909
journal lastpage030909-8
treeJournal of Nuclear Engineering and Radiation Science:;2017:;volume( 003 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record