Show simple item record

contributor authorSecheli, Gabriel
contributor authorViquerat, Andrew
contributor authorAglietti, Guglielmo S.
date accessioned2017-11-25T07:17:22Z
date available2017-11-25T07:17:22Z
date copyright2017/22/8
date issued2017
identifier issn0021-8936
identifier otherjam_084_10_101005.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234530
description abstractThin metal-polymer laminates make excellent materials for use in inflatable space structures. By inflating a stowed envelope using pressurized gas and by increasing the internal pressure slightly beyond the yield point of the metal films, the shell rigidizes in the deployed shape. Structures constructed with such materials retain the deployed geometry once the inflation gas has either leaked away, or it has been intentionally vented. For flight, these structures must be initially folded and stowed. This paper presents a numerical method for predicting the force required to achieve a given fold radius in a three-ply metal-polymer-metal laminate and to obtain the resultant springback. A coupon of the laminate is modeled as a cantilever subject to an increasing tip force. Fully elastic, elastic–plastic, relaxation, and springback stages are included in the model. The results show good agreement when compared with experimental data at large curvatures.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Model of Packaging Folds in Thin Metal-Polymer Laminates
typeJournal Paper
journal volume84
journal issue10
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4037503
journal fristpage101005
journal lastpage101005-11
treeJournal of Applied Mechanics:;2017:;volume( 084 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record