Show simple item record

contributor authorMurakami, Hidenori
date accessioned2017-11-25T07:16:39Z
date available2017-11-25T07:16:39Z
date copyright2017/18/4
date issued2017
identifier issn0021-8936
identifier otherjam_084_06_061002.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234108
description abstractIn order to develop an active nonlinear beam model, the beam's kinematics is examined in this paper, by employing the kinematic assumption of a rigid cross section during deformation. As a mathematical tool, the moving frame method, developed by Cartan (1869–1951) on differentiable manifolds, is utilized by treating a beam as a frame bundle on a deforming centroidal curve. As a result, three new integrability conditions are obtained, which play critical roles in the derivation of beam equations of motion. These integrability conditions enable the derivation of beam models in Part II, starting from the three-dimensional Hamilton's principle and the d'Alembert's principle of virtual work. To illustrate the critical role played by the integrability conditions, the variation of kinetic energy is computed. Finally, the reconstruction scheme for rotation matrices for given angular velocity at each time is presented.
publisherThe American Society of Mechanical Engineers (ASME)
titleDevelopment of an Active Curved Beam Model—Part I: Kinematics and Integrability Conditions
typeJournal Paper
journal volume84
journal issue6
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4036308
journal fristpage61002
journal lastpage061002-16
treeJournal of Applied Mechanics:;2017:;volume( 084 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record