Show simple item record

contributor authorMohammadipour, Amir
contributor authorWillam, Kaspar
date accessioned2017-11-25T07:15:57Z
date available2017-11-25T07:15:57Z
date copyright2016/22/11
date issued2017
identifier issn0021-8936
identifier otherjam_084_02_021011.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4233753
description abstractA numerical 2D lattice approach with an erosion algorithm is employed to analyze bimaterial interface fracture quantities in brittle heterogeneous materials in the context of linear elastic fracture mechanics (LEFM). The concept of configurational force is elucidated and the importance of nodal configurational changes in a mesh where no stress–strain analyses are needed is investigated. Three fracture problems, i.e., an infinite panel with a bi-material interface crack, a double-lap shear test, and a prenotched four-point bending masonry beam are then considered. Validated by analytical solutions, the lattice model uses two distinct postprocessing approaches to derive the energy release rates and configurational forces directly at bimaterial interface crack tips. While the first method takes advantage of the change of the lattice mesh's global stiffness matrix before and after crack growth without any stress–strain calculations to obtain crack tip driving forces, the second approach analyzes the configurational forces opposing the crack tip motion using the Eshelby stress tensor and local force balance law in cracked and heterogeneous domains. It is demonstrated that the discrete material forces at crack tips are closely equal to the tip driving forces for the three fracture problems, confirming that the lattice is an appropriate numerical tool to analyze fracture properties of evolving interface cracks. Satisfying C1 continuity by including rotational displacements for frame struts, there is also no need for the lattice to update interior computational points in the mesh to eliminate spurious material forces away from the tip.
publisherThe American Society of Mechanical Engineers (ASME)
titleOn Energy Release Rates and Configurational Forces for Interfacial Propagating Cracks: A Lattice Approach With a Brittle Erosion Technique
typeJournal Paper
journal volume84
journal issue2
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4035181
journal fristpage21011
journal lastpage021011-14
treeJournal of Applied Mechanics:;2017:;volume( 084 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record