Show simple item record

contributor authorMohsen Kargahi
contributor authorJames C. Anderson
date accessioned2017-05-08T20:59:42Z
date available2017-05-08T20:59:42Z
date copyrightDecember 2006
date issued2006
identifier other%28asce%290733-9445%282006%29132%3A12%281869%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/34700
description abstractIn a companion paper, a structural optimization computer program based on tabu search (TS) was developed and used to optimize three two-dimensional moment resisting frames. All three frames were representative of current design practice for steel structures in the Los Angeles area and were part of an SAC program of study following the Northridge earthquake. The weight reduction obtained for the three-story/three-bay, the nine-story/five-bay, and the twenty-story/five-bay frames in the initial study were 26.4, 18.3, and 25.5%, respectively. In this paper, the seismic performance of the optimized structures is evaluated by calculating the rotation demands in the plastic hinges that form in the structural elements during nonlinear time history analyses. Twenty ground motion records having the return probability of 10% in 50 years are considered in the study. The frames were expected to achieve the Life Safety performance level as outlined in the FEMA-273 guidelines, and in general, they were able to achieve this level of performance. Next, the same frames are optimized using the optimization module of a commercially available program, with the same assumptions (starting point sections, loading, etc.). The TS optimization program was able to achieve a larger weight reduction than the commercially available program. The performance of the final commercial program designs is then briefly evaluated by one nonlinear time history analysis for each building using the ground motion record that produced the most severe responses for the TS designs. Performance of these frames was very similar to the TS design frames. Finally, the performance of the three TS designed frames is compared to that of the original design frames, which were designed under the same code lateral forces. The original frame designs are analyzed for the ground motion record (or records) that resulted in the largest plastic hinge rotations in the TS design frames. The values of the maximum story plastic hinge rotations, story displacements, and interstory drift ratios are compared. The response of the TS optimized frames was comparable to the original frames.
publisherAmerican Society of Civil Engineers
titleStructural Weight Optimization of Frames Using Tabu Search. II: Evaluation and Seismic Performance
typeJournal Paper
journal volume132
journal issue12
journal titleJournal of Structural Engineering
identifier doi10.1061/(ASCE)0733-9445(2006)132:12(1869)
treeJournal of Structural Engineering:;2006:;Volume ( 132 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record