Show simple item record

contributor authorAthanasios Dafnis
contributor authorHolger Kolsch
contributor authorHans-Günter Reimerdes
date accessioned2017-05-08T20:58:15Z
date available2017-05-08T20:58:15Z
date copyrightFebruary 2002
date issued2002
identifier other%28asce%290733-9445%282002%29128%3A2%28153%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/33766
description abstractNonreinforced masonry walls, used as infill panels in concrete frames, are vulnerable elements of buildings when subjected to earthquake loading. Gaps develop at the top of the walls, shortly after construction due to shrinkage of the mortar, and in the event of an earthquake the walls cannot withstand the out-of-plane forces and collapse due to the lack of adequate binding at the top. However, walls confined between rigid supports can display very high resistance to out-of-plane forces through the development of arching action in flexure. Therefore it is recommended, in order to achieve an optimal load-bearing behavior, or rather stability, that the remaining gap at the top of a wall is filled with nonshrinkable mortar some days after the construction of the wall. Shaking table tests, with full-scale walls subjected to transient seismic loads were carried out in order to study the out-of-plane behavior in relation to the characteristics at the top of the walls. A comparison of the measurements with the results from finite element calculations showed a satisfactory correlation.
publisherAmerican Society of Civil Engineers
titleArching in Masonry Walls Subjected to Earthquake Motions
typeJournal Paper
journal volume128
journal issue2
journal titleJournal of Structural Engineering
identifier doi10.1061/(ASCE)0733-9445(2002)128:2(153)
treeJournal of Structural Engineering:;2002:;Volume ( 128 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record