Show simple item record

contributor authorJeffrey A. Packer
contributor authorLuigi Bruno
contributor authorPeter C. Birkemoe
date accessioned2017-05-08T20:53:28Z
date available2017-05-08T20:53:28Z
date copyrightSeptember 1989
date issued1989
identifier other%28asce%290733-9445%281989%29115%3A9%282226%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/30669
description abstractThe behavior and analysis of bolted flange plate connections in rectangular hollow section tension members is considered, with the bolts along only two opposite sides of the rectangular hollow section. Sixteen tension tests on such connections are described, and it is shown that one can, by selecting specific connection parameters, fully develop the tensile resistance of the member by bolting along only two sides of the tube. The application of traditional prying models developed for T‐stubs is found to not correlate well with the test results, so analytical models based on plastic theory are consequently proposed, and these are found to predict the failure mode and the joint ultimate strength to within 6%.
publisherAmerican Society of Civil Engineers
titleLimit Analysis of Bolted RHS Flange Plate Joints
typeJournal Paper
journal volume115
journal issue9
journal titleJournal of Structural Engineering
identifier doi10.1061/(ASCE)0733-9445(1989)115:9(2226)
treeJournal of Structural Engineering:;1989:;Volume ( 115 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record