Show simple item record

contributor authorRussell H. Brown
contributor authorA. Rhett Whitlock
date accessioned2017-05-08T20:50:41Z
date available2017-05-08T20:50:41Z
date copyrightJune 1983
date issued1983
identifier other%28asce%290733-9445%281983%29109%3A6%281362%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/29016
description abstractThis paper reports the strength and behavior of various diameter J‐shaped bolts embedded in concrete masonry. The bolts were tested monotonically, in direct tension, direct shear, and in combined shear and tension. The results of the monotonic tests show that for the combined shear and tension and for tension tests, strengths of the embedments increased with bolt size up to the 3/4‐in. (19 mm) diameter. For larger diameter bolts, the masonry began to fail resulting in approximately equal strengths for increasing bolt diameter. The strength of bolts in shear was found to increase with bolt size as long as the bolt was pretightened sufficiently.
publisherAmerican Society of Civil Engineers
titleStrength of Anchor Bolts in Grouted Concrete Masonry
typeJournal Paper
journal volume109
journal issue6
journal titleJournal of Structural Engineering
identifier doi10.1061/(ASCE)0733-9445(1983)109:6(1362)
treeJournal of Structural Engineering:;1983:;Volume ( 109 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record