Show simple item record

contributor authorH. Sourell
contributor authorJ. M. Faci
contributor authorE. Playán
date accessioned2017-05-08T20:49:23Z
date available2017-05-08T20:49:23Z
date copyrightOctober 2003
date issued2003
identifier other%28asce%290733-9437%282003%29129%3A5%28376%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/28210
description abstractThe use of rotating spray plate sprinklers (RSPS) can reduce the water and energy requirements in pressurized irrigation systems. Installation of RSPS in continuous move irrigation machines, such as traveling trailers (nozzle booms), presents relevant advantages compared to sprinkler-gun machines. The aim of this study is to develop design criteria for continuous-move irrigation machines using the RSPS Nelson Rotator R 3000 D-4. Water distribution by this RSPS was evaluated in an indoor facility under the following experimental conditions: 6.1, 7.0, and 7.8 mm nozzle diameters; 1.0 and 1.5 m nozzle height above the ground; and working pressures of 100, 150, and 200 kPa. The water distribution patterns were overlapped at 3 and 4 m distances, the simulated Christiansen uniformity coefficient averaged 91.8%, and the simulated average precipitation rate under the different experimental conditions ranged between 23 and
publisherAmerican Society of Civil Engineers
titlePerformance of Rotating Spray Plate Sprinklers in Indoor Experiments
typeJournal Paper
journal volume129
journal issue5
journal titleJournal of Irrigation and Drainage Engineering
identifier doi10.1061/(ASCE)0733-9437(2003)129:5(376)
treeJournal of Irrigation and Drainage Engineering:;2003:;Volume ( 129 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record