Dam Break in Channels with 90° Bend

Abstract

In practice, dam-break modeling is generally performed using a one-dimensional (1D) approach for its limited requirements in data and computation. However, for valleys with multiple sharp bends, such a 1D model may fail for predicting as well the maximum water level as the wave arrival time. This paper presents an experimental study of a dam-break flow in an initially dry channel with a 90° bend, with refined measurements of water level and velocity field. The measured data are compared to some numerical results computed with finite-volume schemes associated with Roe-type flux calculation. The 1D approach reveals the expected limits, while a full two-dimensional (2D) approach provides fine level prediction and rather satisfactory information about the arrival time. A hybrid approach is now proposed, mixing the 1D model for the straight reaches and local 2D models for the bends. The compatibility of the Roe fluxes at the interfaces requires a careful formulation, but the resulting scheme seems able to capture reflection and diffraction processes in such a way that the results are really good in what concerns the water level.