Journal of Fluids Engineering: Recent submissions
Now showing items 5281-5300 of 9024
-
Experimental Study of Flow in a High Aspect Ratio 90 Deg Curved Diffuser
(The American Society of Mechanical Engineers (ASME), 1998)Measurements for developing turbulent flow in a high aspect ratio (AS = 6), small area ratio (AR = 2), 90 deg curved diffuser have been made. Mean velocities, static and total pressures, and ... -
Wing Section Optimization for Supersonic Viscous Flow
(The American Society of Mechanical Engineers (ASME), 1998)To improve the performance of a highly swept supersonic wing, it is desirable to have an automated design method that also includes a higher fidelity to the flow physics. With this impetus, ... -
A Procedure for Using DNS Databases
(The American Society of Mechanical Engineers (ASME), 1998)A second moment closure (SMC) computation is compared in detail with the direct numerical simulation (DNS) data of Le et al. (1997) for the backstep flow at Re = 5100 in an attempt to ... -
A Modified Borda-Carnot Relation for the Prediction of Maximum Recovery Pressure in Planar Sudden Expansions Flows
(The American Society of Mechanical Engineers (ASME), 1998) -
Effect of Shear Flows on the Outlet Angle in Axial Compressor Cascades—Methods of Prediction and Correlation With Experiments
(The American Society of Mechanical Engineers (ASME), 1967)A theory is presented for accurate prediction of the spanwise variation of outlet angle in axial compressor cascades, taking into account the effects of secondary flow, Bernoulli surface rotation, ... -
Direct Measurements of Turbulent Boundary Layer Wall Pressure Wavenumber-Frequency Spectra
(The American Society of Mechanical Engineers (ASME), 1998)Direct measurements of streamwise wavenumber-frequency spectra of turbulent wall pressure fluctuations were made in an acoustically quiet water tunnel. A linear array of evenly spaced flush mounted ... -
The Systematic Uncertainty of Laboratory Flow Calibrations
(The American Society of Mechanical Engineers (ASME), 1998)There are two axioms applicable to this paper: the first is that no flowmeter can be more accurate than the laboratory which calibrated it; the second that no uncalibrated flowmeter can be ... -
Erratum: “Discussion of ‘Experimental Measurement in a Centrifugal Pump Impeller,’” [ASME J. Fluids Eng., 1997, 119(3), p. 729]
(The American Society of Mechanical Engineers (ASME), 1998) -
An h-Adaptive Finite Element Model for Environmental Transport Prediction
(The American Society of Mechanical Engineers (ASME), 1998) -
Review: Diffuser Design and Performance Analysis by a Unified Integral Method
(The American Society of Mechanical Engineers (ASME), 1998)A computational tool, called a Unified Integral Method (UIM) is reviewed. The method is used for preliminary design and performance analysis of simple diffusers with thin inlet boundary layers ... -
Flow Around Circular Cylinders—Volume 1: Fundamentals
(The American Society of Mechanical Engineers (ASME), 1998) -
A Tribute to Stephen J. Kline (1922–1997)
(The American Society of Mechanical Engineers (ASME), 1998) -
Time Resolved Torque of Three-Dimensional Rotating Bluff Bodies in a Cylindrical Tank
(The American Society of Mechanical Engineers (ASME), 1998)Torque measurements have been made on rotating three-dimensional bluff bodies in a cylindrical container from start-up to mean flow steady state. The flow is observed to pass through three ... -
A Note on the Characteristics of Droplet-Laden Jets
(The American Society of Mechanical Engineers (ASME), 1998) -
On the Wall-Pressure Spectrum Under a Three-Dimensional Boundary Layer
(The American Society of Mechanical Engineers (ASME), 1998) -
Relaxation Models for Wave Phenomena in Liquid-Vapor Bubble Flow in Channels
(The American Society of Mechanical Engineers (ASME), 1998)We examine wave characteristics of a liquid-vapor mixture in order to investigate certain features of the homogeneous relaxation model. The model is described by one-dimensional averaged mass, ... -
Flow Characteristics of Splined Tipped Circular Jets
(The American Society of Mechanical Engineers (ASME), 1998) -
Effect of Trailing Edge Suction on Coherent Structures in Near Wake
(The American Society of Mechanical Engineers (ASME), 1998)Experimental results, obtained from hot-wire measurements using a conditional sampling technique, demonstrate feasibility of controlling large-scale spanwise vortices (coherent structures) in the near ... -
Prediction of Solid/Free-Surface Juncture Boundary Layer and Wake of a Surface-Piercing Flat Plate at Low Froude Number
(The American Society of Mechanical Engineers (ASME), 1998)Results are reported of a RANS simulation investigation on the prediction of turbulence-driven secondary flows at the free-surface juncture of a surface-piercing flat plate at low Froude numbers. ... -
A Simple Analytical Theory for Interpreting Measured Total Pressure in Multiphase Flows
(The American Society of Mechanical Engineers (ASME), 1998)This paper presents a simple, analytical theory for determining total pressure in multiphase flows, a subject of theoretical interest as well as of practical importance. It is shown here that ...