Journal of Fluids Engineering: Recent submissions
Now showing items 1921-1940 of 9024
-
Some Observations Relating to Suction Performance of Inducers and Pumps
(The American Society of Mechanical Engineers (ASME), 1972)Tests performed with a remarkable number of inducers and pumps indicate that there exists a definite pattern of the manner in which the velocity of flow of the liquid and the peripheral ... -
Temperature Effects in Cavitation Damage
(The American Society of Mechanical Engineers (ASME), 1972)Cavitation damage is studied for several materials over a range of temperatures in the cavitating liquid from 0 C to 90 deg C. The cavitating liquids used were distilled water, distilled water ... -
A Theoretical Model for Nonseparated Mixing of a Confined Jet
(The American Society of Mechanical Engineers (ASME), 1972)A model and procedure for calculating turbulent mixing of a confined jet is presented. The flow consists of a high velocity jet which is directed into a constant diameter duct, where it mixes ... -
Turbulent Separation Analysis Ahead of a Step
(The American Society of Mechanical Engineers (ASME), 1972)The general nature of the flow separation of a turbulent boundary layer ahead of an inward-projecting normal step is shown to be well predicted by a rotational flow analysis (frozen vorticity ... -
A Study of Creep Damage Rules
(The American Society of Mechanical Engineers (ASME), 1972)A brief review is given of the literature on damage accumulation during creep and inadequacies in our present understanding are pointed out. By drawing on recent studies of the processes ... -
Discussion: “Surges in Air Vents Adjacent to Emergency Gates” (McCaig, I. W., and Jonker, F. H., 1961, ASME J. Basic Eng., 83, pp. 679–682)
(The American Society of Mechanical Engineers (ASME), 1961) -
Studies on Cavitation Erosion
(The American Society of Mechanical Engineers (ASME), 1972)Cavitation damage tests of iron and steel have been carried out using two types of experimental facilities. One is a water tunnel system which presumably simulates the field conditions fairly ... -
Study of Flow Phenomena in the Impeller Passage by Using a Singularity Method
(The American Society of Mechanical Engineers (ASME), 1972)The vortex, the velocity, and the pressure distribution along the vane surfaces are calculated for two impellers, one having six vanes and the other twelve vanes. The vanes were of logarithmic ... -
Discussion: “Axial Hydraulic Thrust Caused by Pump Starting” (Miyashiro, H., and Takada, K., 1972, ASME J. Basic Eng., 94, pp. 629–635)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “An Optimum Design for Pressure Sensing Machined Diaphragms” (Motherway, J. E., 1972, ASME J. Basic Eng., 94, pp. 622–628)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “Actuator Disk Theory for Incompressible Highly Rotating Flows” (Oates, G. C., 1972, ASME J. Basic Eng., 94, pp. 613–621)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “Liquid Surface Motion Induced by Acceleration and External Pressure” (Moody, F. J., and Reynolds, W. C., 1972, ASME J. Basic Eng., 94, pp. 606–611)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “Conduit Representation in Closed Loop Simulation of Hydroelectric Systems” (Wozniak, L., and Fett, G. H., 1972, ASME J. Basic Eng., 94, pp. 599–604)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “Forming of 7075-T6 Aluminum in High Pressure Environments” (Pendleton, R. L., and Davis, R. L., 1972, ASME J. Basic Eng., 94, pp. 595–598)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “A Viscometer for High-Pressure Use, and Some Results” (Winer, W. O., 1972, ASME J. Basic Eng., 94, pp. 586–588)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “A Preliminary Study of Turbulence Characteristics of Flow Along a Corner” (Gessner, F. B., and Jones, J. B., 1961, ASME J. Basic Eng., 83, pp. 657–661)
(The American Society of Mechanical Engineers (ASME), 1961) -
Discussion: “Improvement of Hysteresis Characteristics of Francis Pump-Turbines When Operated as Turbine” (Yamabe, M., 1972, ASME J. Basic Eng., 94, pp. 581–585)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “Effects of Cold Working Under Pressure on Subsequent Yield” (Hoeg, J. G., and Davis, R. L., 1972, ASME J. Basic Eng., 94, pp. 575–580)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “Some Observations Relating to Suction Performance of Inducers and Pumps” (Yedidiah, S., 1972, ASME J. Basic Eng., 94, pp. 567–573)
(The American Society of Mechanical Engineers (ASME), 1972) -
Discussion: “Temperature Effects in Cavitation Damage” (Plesset, M. S., 1972, ASME J. Basic Eng., 94, pp. 559–563)
(The American Society of Mechanical Engineers (ASME), 1972)