Journal of Thermal Science and Engineering Applications: Recent submissions
Now showing items 801-820 of 1661
-
Control of Boiling Instabilities in a Two-Phase Pumpless Loop Using Water-Alcohol Mixtures
(The American Society of Mechanical Engineers (ASME), 2021)The mitigation of boiling instabilities by using water-alcohol mixtures as coolants in a two-phase pumpless loop is experimentally investigated. Water-miscible alcohol, namely, 2-propanol, is added to water in quantities ... -
Single-Phase Natural Circulation Loop Using Oils and Ternary Hybrid Nanofluids: Steady-State and Transient Thermo-Hydraulics
(The American Society of Mechanical Engineers (ASME), 2021)Steady-state and transient behaviors of single-phase natural circulation loop (SPNCL) are investigated using four thermal oils (Therminol VP1, Paratherm CR, Dowtherm A, and Dowtherm Q) and water-based ternary hybrid (various ... -
Effectiveness of a Shell and Helically Coiled Tube Heat Exchanger Operated With Gold Nanofluids at Low Concentration: A Multi-Level Factorial Analysis
(The American Society of Mechanical Engineers (ASME), 2021)This work assesses the thermal performance of gold nanofluid as a cooling liquid in a shell and helically coiled tube (SHCT) heat exchanger (HE) built at the bench scale. Tests planned under a multi-level factorial ... -
Reviewer’s Recognition
(The American Society of Mechanical Engineers (ASME), 2021)The Editor and Editorial Board of the Journal of Thermal Science and Engineering Applications would like to thank all of the reviewers for volunteering their expertise and time reviewing manuscripts in 2020. Serving as ... -
Special Issue: Micro/Nanoscale Heat and Mass Transfer
(The American Society of Mechanical Engineers (ASME), 2020)The 6th ASME Micro/Nanoscale Heat and Mass Transfer Conference (MNHMT 2019) was held in Dalian, China, July 7—9, 2019. The Conference was organized by Dalian Maritime University and Dalian University of Technology and ... -
Professor Satish G. Kandlikar on His 70th Birthday
(The American Society of Mechanical Engineers (ASME), 2020)Satish G. KandlikarProfessor Satish G. Kandlikar is one of the well-known names in the field of flow boiling. He was born in June 1950 in India. He received his B.S. in Mechanical Engineering from Marathawada University, ... -
Experimental Investigation of Heat Transfer Enhancement of Shell and Tube Heat Exchanger Using SnO2-Water and Ag-Water Nanofluids
(The American Society of Mechanical Engineers (ASME), 2020)In this investigation, the performance of the shell and tube heat exchanger operated with tin nanoparticles-water (SnO2-W) and silver nanoparticles-water (Ag-W) nanofluids was experimentally analyzed. SnO2-W and Ag-W ... -
Complete Parametric Study of Bagasse Pellets During High-Temperature Steam Gasification
(The American Society of Mechanical Engineers (ASME), 2020)A complete parametric study of bagasse pellets under high-temperature steam gasification in relevant industrial operating conditions was investigated. Regarding thermal behaviors, the maximum rate of weight loss (Rmax = ... -
Fully Developed Transport Constants of Annular Tubes, With Application to the Entrance Region
(The American Society of Mechanical Engineers (ASME), 2020)Description of the laminar thermal entry problem in annular tubes has historically been limited to a few geometric cases that require piecing together classical Graetz series and Lévêque series solutions to span all values ... -
Computer Simulation of Mixed Convection of Alumina-Deionized Water Nanofluid Over Four In-Line Electronic Chips Embedded in One Wall of a Vertical Rectangular Channel
(The American Society of Mechanical Engineers (ASME), 2020)This paper presents a computational study of mixed convection cooling of four in-line electronic chips by alumina-deionized (DI) water nanofluid. The chips are flush-mounted in the substrate of one wall of a vertical ... -
Improved Radial Plane Fins Heat Sink for Light-Emitting Diode Lamps Cooling
(The American Society of Mechanical Engineers (ASME), 2020)A numerical study is conducted concerning the improvement of radial plane fins heat sinks for natural convection cooling of light-emitting diode (LED) lamps. The main objective is to maintain the temperature of the heat ... -
A Novel Method to Simultaneously Identify Temperature-Dependent Thermal Properties and Verification
(The American Society of Mechanical Engineers (ASME), 2020)A novel method for the identification of thermal conductivity and specific heat capacity simultaneously by solving inverse heat transfer problems (IHTPs) is proposed. The present method uses a new iterative format of the ... -
Numerical Investigation of Turbulent Premixed Combustion in a High Acceleration Field
(The American Society of Mechanical Engineers (ASME), 2020)To guide ultra-compact combustor (UCC) engineering, simulations were conducted about turbulent premixed combustion in a high acceleration field which is called high-g combustion, along with a detailed investigation on the ... -
A Numerical Model for Heat Transfer in Dry and Wet Grinding Based on the Finite Difference Method and Jet Cooling
(The American Society of Mechanical Engineers (ASME), 2020)Grinding is a promising machining method for finishing workpieces that need a smooth surface with tight tolerances. Due to the high thermal energy generated in the grinding zone, an accurate prediction of workpiece temperature ... -
Aerosol Dynamics Modeling With Chemkin-Pro Surface-Kinetics User-Routines
(The American Society of Mechanical Engineers (ASME), 2020)The Chemkin-Pro Application Programming Interface (API) was used to implement surface-kinetics user-routines to expand current aerosol dynamics models. Phase change mechanisms were expanded to include homogeneous nucleation ... -
Experimental Study of Air Slot Jet Impingement Cooling From Cylinder Placed on a Flat Plate
(The American Society of Mechanical Engineers (ASME), 2020)The experimental study for air slot jet impingement cooling from the heated cylinder is carried out. The heated cylinder is placed on a flat plate. The flat plate has an effective dimension as plate length (P) from heat ... -
Jet Impingement Heat Transfer Enhancement by U-Shaped Crossflow Diverters
(The American Society of Mechanical Engineers (ASME), 2020)Array-jet impingement is typically used in gas turbine blade near-wall cooling, where high rates of heat dissipation is required. The accumulated crossflow mass flux results in significant reduction in jet effectiveness ... -
Three-Dimensional Simulation of Wind-Driven Ventilation Through a Windcatcher With Different Inlet Designs
(The American Society of Mechanical Engineers (ASME), 2020)Windcatcher is an effective natural ventilation system, and its performance depends on several factors including wind speed and wind direction. It provides a comfortable and healthy indoor environment since the introduced ... -
Investigation of the Effect of Perforated Sheath on Thermal-Flow Characteristics Over a Gas Turbine Reverse-Flow Combustor—Part 2: Computational Analysis
(The American Society of Mechanical Engineers (ASME), 2020)The objective of Part 2 is to employ a computational scheme to investigate the difference in flow pattern, pressure drop, and heat transfer in a gas turbine’s dump diffuser and over the outer surface of the combustor with ... -
Soil Thermal Inertia Effect on Shallow Basement Energy Performance in Different Morocco Climates
(The American Society of Mechanical Engineers (ASME), 2020)This study deals with the energy performance of a shallow basement in six climates ranging from cold to desert climate. A case study of a partially buried house located in the hot semi-arid climate of Marrakech (Morocco) ...