Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 7141-7160 of 7723
-
Mixed Exact-Approximate Planar Mechanism Position Synthesis
(The American Society of Mechanical Engineers (ASME), 1977)Design equations are developed for rigid body guidance through K equals one, two, three, and four exact positions and N – K approximate positions. Both circle and straight-line points are ... -
Experimental Investigation of the Characteristics of Dynamic Cutting Process
(The American Society of Mechanical Engineers (ASME), 1977)The dynamic response of the shear plane and the variations of the dynamic cutting coefficients are experimentally investigated at various values of feed, cutting speed, rake angle, clearance ... -
Design of Four-Bar Function Generators With Mini-Max Transmission Angle
(The American Society of Mechanical Engineers (ASME), 1977)A new method of designing four-bar function generators with optimum transmission angle is presented. Transmission angles are considered optimum, in a mini-max sense, when their extreme values ... -
Effect of Thickness on the Stresses in a Plate With an Elliptic Hole
(The American Society of Mechanical Engineers (ASME), 1977)A three-dimensional analysis is presented for the stresses around an elliptic hole in an infinitely long thick plate subjected to uniform tension and shear. The maximum stress is found to ... -
A Determination of Contact-Loss at a Bearing of a Linkage Mechanism
(The American Society of Mechanical Engineers (ASME), 1977)A method is described for analyzing the kinematic and dynamic response of a linkage mechanism in which one bearing has a known clearance. Assuming the clearance to be represented by a massless ... -
A New Constant Velocity Coupling
(The American Society of Mechanical Engineers (ASME), 1977)A constant velocity coupling has been developed that does not resemble any coupling built before. It was intended for a specialized application, with specifications that are outside the range ... -
On the Design of Bolted Connections With Gaskets Subjected to Fatigue Loading
(The American Society of Mechanical Engineers (ASME), 1977)Bolted connections subjected to fatigue loading are usually considered to be the “weak point” in a design. They usually are highly preloaded to increase their resistance to external dynamic ... -
Analytical Design of Cam-Type Angular-Motion Compensators
(The American Society of Mechanical Engineers (ASME), 1977)In this paper, a unified approach is presented for the analytical design of cams used in various angular-motion compensators. These mechanisms can be classified as cam-modulated linkages. For a ... -
The Generalized Reduced Gradient Method: A Reliable Tool for Optimal Design
(The American Society of Mechanical Engineers (ASME), 1977)This paper is a presentation of a method, called the Generalized Reduced Gradient Method, which has not received wide attention in the engineering design literature. Included is a theoretical ... -
Stochastic Characterization of Macro- and Microerrors of Journal Bearing Roundness
(The American Society of Mechanical Engineers (ASME), 1977)A new approach for the characterization of form error and surface roughness of round bearings is presented. The method employs the theory of random function excursions to describe the macro- ... -
Natural Resting Aspects of Parts for Automatic Handling
(The American Society of Mechanical Engineers (ASME), 1977)A theoretical study is made of the orientations in which small parts will naturally feed in a vibratory-bowl feeder. The results are applied to regular prismatic part shapes and are tested ... -
The Multiport Lever: A Mechanical Logical Element
(The American Society of Mechanical Engineers (ASME), 1977)In its basic form the multiport lever consists of a link that can pivot about one of a number of axes or ports, depending upon a force balance. The two-port lever occurs quite frequently ... -
Investigation of Spiking in Electron Beam Welding Using Stationary Stochastic Models
(The American Society of Mechanical Engineers (ASME), 1977)The spiking phenomenon in electron beam welding is characterized using the second-order continuous autoregressive model. The model parameters are then physically interpreted in terms of the random ... -
Synthesis of Spring Parameters to Satisfy Specified Energy Levels in Planar Mechanisms
(The American Society of Mechanical Engineers (ASME), 1977)The potential energy storage capabilities of linear springs are integrated with the nonlinear motion of mechanisms to provide approximation of desired counter-loading functions. The approximating ... -
Synthesis of Spring Parameters to Balance General Forcing Functions in Planar Mechanisms
(The American Society of Mechanical Engineers (ASME), 1977)The analytical formulation from a companion paper is extended to allow the concept of multiply separated positions to be applied to the spring-energy problem. A major change in perspective for ... -
Properties of Reinforced Abrasive Disks in Flexure
(The American Society of Mechanical Engineers (ASME), 1977)This paper deals with a study of the flexural behavior of thin, fiber-reinforced, resinoid abrasive disks. During use, these disks generally encounter a much higher ratio of flexural or bending ... -
Instantaneous Kinematics of a Special Two-Parameter Motion
(The American Society of Mechanical Engineers (ASME), 1977)In this paper, the author studies the instantaneous kinematics of a rigid body when it is guided by a revolute-revolute crank. It is shown that the locus of the instantaneous screw axes is ... -
Discussion: “Analytical Design of Cam-Type Angular-Motion Compensators” (Dhande, S. G., and Sandor, G. N., 1977, ASME J. Eng. Ind., 99, pp. 381–386)
(The American Society of Mechanical Engineers (ASME), 1977) -
Erratum: “Mechanisms as Components of Dynamic Systems: A Bond Graph Approach” (Journal of Engineering for Industry, 1977, 99, pp. 104–111)
(The American Society of Mechanical Engineers (ASME), 1977) -
Delamination Wear of Dispersion-Hardened Alloys
(The American Society of Mechanical Engineers (ASME), 1977)In order to investigate the effect of hard incoherent dispersoids on the sliding wear rate of dispersion-hardened alloys, internally oxidized Cu-Cr and Cu-Si alloys were tested. OFHC copper and ...