Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 6401-6420 of 7723
-
Effect of Hardness on the Surface Integrity of AISI 4340 Steel
(The American Society of Mechanical Engineers (ASME), 1986)The effect of hardness on the residual stress in the machined surface of AISI 4340 steel was studied. Chips produced during the machining also were examined and the surface structure was ... -
Extensive Analysis and Development of Straightness Measurement by Sequential-Two-Points Method
(The American Society of Mechanical Engineers (ASME), 1986)Characteristics of errors which might occur in the straightness measurement method due to sequential-two-points were investigated. The investigation made it clear that the slight discrepancies of ... -
Whirling Vibration in Drilling. Part 1: Cause of Vibration and Role of Chisel Edge
(The American Society of Mechanical Engineers (ASME), 1986)The whirling vibration of the drill in the beginning of the drilling operation is experimentally investigated. Special attention is paid to how vibration develops as the drill proceeds into the ... -
In-Process Detection of Tool Breakage in Milling
(The American Society of Mechanical Engineers (ASME), 1986)An adaptive signal processing scheme for the cutting force signal was used to detect the fracture and chipping of a cutting tool during milling operation. The cutting force signal was modeled ... -
Tool Wear Monitoring Through the Dynamics of Stable Turning
(The American Society of Mechanical Engineers (ASME), 1986)This paper describes a microcomputer-based technique for monitoring the flank wear on a single-point tool engaged in a turning operation. The technique is based on the real-time computation of ... -
Erratum: “A Comparison of Tension Leveling Theories” (Journal of Engineering for Industry, 1986, 108, pp. 154–155)
(The American Society of Mechanical Engineers (ASME), 1986) -
Analysis of Central Bursting Defects in Plane Strain Drawing and Extrusion
(The American Society of Mechanical Engineers (ASME), 1986)Based on the upper-bound theorem in limit analysis, the central bursting defect in plane strain drawing and extrusion is analyzed by comparing the proportional flow with the central bursting ... -
Improving Stability of Slender End Mills Against Chatter
(The American Society of Mechanical Engineers (ASME), 1986)The strongest mechanisms that contribute to machining chatter are regeneration and mode coupling. Special designs of milling cutters have evolved with the aim to increase stability against chatter ... -
An Integrated Quality Systems Approach to Quality and Productivity Improvement in Continuous Manufacturing Processes
(The American Society of Mechanical Engineers (ASME), 1986)An integrated quality systems methodology is presented as a framework within which the concepts of process control can be used to improve quality and productivity. The process is mathematically ... -
Analysis of Acoustic Emission Signal Generation During Martensitic Transformation
(The American Society of Mechanical Engineers (ASME), 1986)The formation of cold cracks during welding of high strength steels is almost always preceded by martensite formation. Real time detection of both the martensite and cracks formed is a basic ... -
Governing Equations of the Shear Angle Oscillation in Dynamic Orthogonal Cutting
(The American Society of Mechanical Engineers (ASME), 1986)Chatter is a complex physical process in machining. One of the practical ways of modeling its transfer behavior is to derive the force functions theoretically from the substance of steady state ... -
The Upper Bound Approach to Plane Strain Problems Using Linear and Rotational Velocity Fields—Part I: Basic Concepts
(The American Society of Mechanical Engineers (ASME), 1986)This paper investigates an upper bound approach to plane strain deformation of a rigid, perfectly plastic material. In this approach the deformation region is divided into a finite number of ... -
An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems
(The American Society of Mechanical Engineers (ASME), 1986)As more emphasis is placed on quality and productivity in manufacturing, it becomes necessary to develop models that more accurately describe the performance of machining processes. An improved ... -
Nonisothermal Axisymmetric Forging
(The American Society of Mechanical Engineers (ASME), 1986)An approximate solution for nonisothermal upset forging is presented. A finite difference thermal analysis and an upper-bound deformation solution are used for this purpose. The thermal analysis ... -
The Upper Bound Approach to Plane Strain Problems Using Linear and Rotational Velocity Fields—Part II: Applications
(The American Society of Mechanical Engineers (ASME), 1986)Following Part I which investigated an upper bound approach to plane strain deformation of a rigid, perfectly plastic material, this Part II considers the same approach as applied to actual ... -
Distortion in Thermal Field Around Inserted Thermocouples in Experimental Interfacial Studies
(The American Society of Mechanical Engineers (ASME), 1986)The disturbance in a two-dimensional steady temperature field due to the presence of a thermocouple void is investigated. The void is located at a distance from an isothermal surface in a ... -
Measurement of Grinding Temperature Using Infrared Radiation Pyrometer With Optical Fiber
(The American Society of Mechanical Engineers (ASME), 1986)The heat pulses produced by cutting grains in a workpiece were measured using an infrared radiation pyrometer connected by means of an optical fiber. The results obtained were compared with ... -
A Remote Temperature Sensing Technique for Estimating the Cutting Interface Temperature Distribution
(The American Society of Mechanical Engineers (ASME), 1986)Cutting temperature is a major factor in controlling tool wear rate. Thus, sensing and control of cutting temperature is important in achieving a desired tool performance. This paper is concerned ... -
Modeling of Continuous Mixers in Polymer Processing
(The American Society of Mechanical Engineers (ASME), 1985)The numerical modeling of creeping flow and continuous mixing in polymer processing equipment is considered. The decoupling of axial and transverse flow problems is the main subject of analysis. ... -
Satellite Servicing by Teleoperators
(The American Society of Mechanical Engineers (ASME), 1985)The Teleoperator Maneuvering System (TMS) will initially be a Shuttle-launched ground-based, satellite servicing vehicle controlled by man-in-the-loop. During Space Station implementation, it will ...