Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 621-640 of 7723
-
Development and Optimization of Ultrasonic Elliptical Vibration Cutting Device Based on Single Excitation
(The American Society of Mechanical Engineers (ASME), 2021)A ultrasonic elliptical vibration cutting (UEVC) technique, as an advanced cutting method, has been successfully applied to machine difficult-to-cut materials for the last decade. In this study, the mechanism of the ... -
Discrete Phase Modeling of the Powder Flow Dynamics and the Catchment Efficiency in Laser Directed Energy Deposition With Inclined Coaxial Nozzles
(The American Society of Mechanical Engineers (ASME), 2021)Laser directed energy deposition (DED) is one of the most promising additive manufacturing processes for restoring high-value components. The damaged components can have complex free-form shapes, which necessitate depositions ... -
Integrated Remanufacturing and Opportunistic Maintenance Decision-Making for Leased Batch Production Lines
(The American Society of Mechanical Engineers (ASME), 2021)With the development of the product-service paradigm, many original equipment manufacturers (OEMs) have begun to provide remanufacturing services besides maintenance services as the lessors. An integrated contract including ... -
Hierarchical Nano/Micro-Structured Surfaces With High Surface Area/Volume Ratios
(The American Society of Mechanical Engineers (ASME), 2021)Recently, many studies have investigated additive manufacturing (AM) of hierarchical surfaces with high surface area/volume (SA/V) ratios, and their performance has been characterized for applications in next-generation ... -
Gas-Tungsten Arc Welding of Dissimilar Aluminum Alloys With Nano-Treated Filler
(The American Society of Mechanical Engineers (ASME), 2021)Arc welding of dissimilar aluminum alloys is in high demand in industry but often challenging in practice. Dissonant material properties between the base metals often lead to solidification cracking in the weld metal upon ... -
Preliminary Experimental Study of Warm Ultrasonic Impact-Assisted Laser Metal Deposition
(The American Society of Mechanical Engineers (ASME), 2021)A preliminary experimental study on “warm ultrasonic impact-assisted laser metal deposition” (WUI-LMD) is reported, and such a study is rare in literature to the authors’ knowledge. In WUI-LMD, an ultrasonic impact treatment ... -
Toward Sub-Surface Pore Prediction Capabilities for Laser Powder Bed Fusion Using Data Science
(The American Society of Mechanical Engineers (ASME), 2021)Achieving defect-free parts is traditionally challenging in laser powder bed fusion (LPBF). The mechanical properties of additively manufactured parts are highly affected by their density; as such, research in defect ... -
Crystal Plasticity Modeling of Laser Peening Effects on Tensile and High Cycle Fatigue Properties of 2024-T351 Aluminum Alloy
(The American Society of Mechanical Engineers (ASME), 2021)This study aims to model the effects of multiple laser peening (LP) on the mechanical properties of AA2024-T351 by including the material microstructure and residual stresses using the crystal plasticity finite element ... -
A Comprehensive Experiment-Based Approach to Generate Stress Field and Slip Lines in Cutting Process
(The American Society of Mechanical Engineers (ASME), 2021)This study proposes a comprehensive experiment-based method to determine stress field and slip lines in metal cutting process. The chip geometry and workpiece's strain and strain rate fields are determined using an in situ ... -
Five-Axis Machine Tool Volumetric and Geometric Error Reduction by Indirect Geometric Calibration and Lookup Tables
(The American Society of Mechanical Engineers (ASME), 2021)Modern CNC machine tools provide lookup tables to enhance the machine tool’s precision but the generation of table entries can be a demanding task. In this paper, the coefficients of the 25 cubic polynomial functions used ... -
A Comparative Study of Pellet-Based Extrusion Deposition of Short, Long, and Continuous Carbon Fiber-Reinforced Polymer Composites for Large-Scale Additive Manufacturing
(The American Society of Mechanical Engineers (ASME), 2021)Pellet-based extrusion deposition of carbon fiber-reinforced composites at high material deposition rates has recently gained much attention due to its applications in large-scale additive manufacturing. The mechanical and ... -
A Robust Design Perspective on Factors Influencing Geometric Quality in Metal Additive Manufacturing
(The American Society of Mechanical Engineers (ASME), 2021)Additive manufacturing (AM) for metals is a widely researched, continuously enhanced manufacturing process and is implemented across various industries. However, the AM process exhibits variation that affects the geometric ... -
Enhancing Cavitation Intensity in Co-Flow Water Cavitation Peening With Organ Pipe Nozzles
(The American Society of Mechanical Engineers (ASME), 2021)Co-flow water cavitating jets induce compressive residual stress through cavitation impacts produced by the collapse of the cavitation cloud. Co-flow water cavitation peening causes minimal surface alteration when compared ... -
Efficient Spot Welding Sequence Simulation in Compliant Variation Simulation
(The American Society of Mechanical Engineers (ASME), 2021)Geometrical variation is one of the sources of quality issues in a product. Spot welding is an operation that impacts the final geometrical variation of a sheet metal assembly considerably. Evaluating the outcome of the ... -
To Study the Effect of Microstructures on Machinability of Inconel-718 Superalloy in Micro-Drilling Process
(The American Society of Mechanical Engineers (ASME), 2021)Nickel-based superalloys have been extensively used in the aerospace industry due to their excellent mechanical properties at elevated temperatures. The mechanical properties of the Inconel-718 majorly depend on its ... -
Effect of Temperature on Tool Wear During Milling of Ti64
(The American Society of Mechanical Engineers (ASME), 2021)In recent years, the development of new, increasingly resistant materials limit machining productivity. This observation is especially true for titanium alloys. The state-of-the-art shows that one of the phenomena responsible ... -
An Automated Edge Computing-Based Condition Health Monitoring System: With an Application on Rolling Element Bearings
(The American Society of Mechanical Engineers (ASME), 2021)A failure of rolling element bearings is a frequent cause of machine breakdowns and results in a production loss due to the sudden failure. A regular condition health monitoring and an associated detection of bearing defects ... -
Enhancements on Dissimilar Friction Stir Welding Between AZ31 and SPHC Mild Steel With Al–Mg as Powder Additives
(The American Society of Mechanical Engineers (ASME), 2021)Dissimilar materials joining between AZ31 magnesium alloy and SPHC mild steel with Al–Mg powder additives were successfully produced by the friction stir welding process. Al–Mg powder additives were set in a gap between ... -
Characteristics and Mechanism of Top Burr Formation in Micro-Milling LF21
(The American Society of Mechanical Engineers (ASME), 2021)During micro-milling aluminum alloy LF21 process, it tends to produce large top burr usually detected at the top of slot walls. Therefore, the machining accuracy and quality of the micro-parts are difficult to satisfy. To ... -
The Effect of Electron Beam Irradiation on Elastomers Used in Tooling for Composites Manufacturing
(The American Society of Mechanical Engineers (ASME), 2021)Background: This technical brief discusses material degradation issues and potential remedies related to advanced thermoset composites manufacturing using a new out-of-autoclave consolidation and curing process called ...