Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 6041-6060 of 7723
-
Hydrostatic Extrusion
(The American Society of Mechanical Engineers (ASME), 1965)The process of hydrostatic extrusion, where the liquid-surrounded billet is pushed through a die by means of liquid pressure instead of a ram, is analyzed. Expressions are provided giving the ... -
A New Analysis of the Forces in Orthogonal Metal Cutting
(The American Society of Mechanical Engineers (ASME), 1965)The mechanics of orthogonal cutting have been reexamined and for the shear-plane concept of metal cutting, linear and quadratic-force models were suggested. It was shown that for steel SAE-1213, ... -
Application of Self-Excited Machine-Tool Chatter Theory: Contribution to Machine-Tool Chatter Research—4
(The American Society of Mechanical Engineers (ASME), 1965)This paper is one of a series of four being presented simultaneously on the subject of self-excited machine-tool chatter. It deals primarily with the applications of the closed-loop chatter ... -
Cutting Dynamics in Machine Tool Chatter: Contribution to Machine-Tool Chatter Research—3
(The American Society of Mechanical Engineers (ASME), 1965)This is one of four papers presented simultaneously on the general subject of chatter. This work is concerned with finding a representation of the dynamic metal-cutting process which is suitable ... -
Structural Dynamics in Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research—2
(The American Society of Mechanical Engineers (ASME), 1965)This paper is one of four being presented simultaneously on the subject of self-excited machine-tool chatter. Transfer-function theory is applied to obtain a representation of the dynamics of a ... -
Theory of Self-Excited Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research—1
(The American Society of Mechanical Engineers (ASME), 1965)Self-excited chatter, an instability of the cutting process in combination with the machine structure, is a basic performance limitation of a machine tool. A theory is developed which permits ... -
Optimum Diameter and Position of a Fly Cutter for Milling 0.45 C Steel, 195 BhN and 0.4 C Steel, 167 BhN at Light Cuts
(The American Society of Mechanical Engineers (ASME), 1965)Selection of cutter diameter and position of the cutter with reference to the work piece was studied to control the face-milling tool tip failure by fracture. The majority of the tests consisted ... -
Dynamics of the Metal-Cutting Process
(The American Society of Mechanical Engineers (ASME), 1965)An investigation into the dynamics of the metal-cutting process has been carried out using analytical and experimental approaches. An exploratory analysis into the dynamic behavior of the cutting ... -
Strip-Drawing Experiments With a Sigmoidal Die Profile
(The American Society of Mechanical Engineers (ASME), 1965)Strip-drawing experiments were conducted to evaluate a sigmoidal die profile which, according to slip-line theory, can achieve perfect work efficiency and uniform deformation. The performance of ... -
Optimization of Step Rockets by the Discrete Maximum Principle
(The American Society of Mechanical Engineers (ASME), 1965)The general algorithm of the discrete maximum principle with information feedback is stated briefly. It is applied to obtain solutions for the optimum stage-weight distribution problems of a ... -
Interfacial Heat and Mass Transfer in a Suddenly Pressurized, Binary Liquid-Vapor System
(The American Society of Mechanical Engineers (ASME), 1965)An analysis is made of the phase change across the interface of a suddenly pressurized, binary liquid-vapor system. The time-dependent temperature and concentration distribution, interfacial growth, ... -
On Nonlinear Bending of a Plate Strip
(The American Society of Mechanical Engineers (ASME), 1965)Ends of an initially straight plate strip are rotated 90 deg. Using nonlinear bending theory, the maximum stress is obtained as a function of the half-distance between the rotated ends of the ... -
Sound Radiation From Submerged Cylindrical Shells of Finite Length
(The American Society of Mechanical Engineers (ASME), 1965)A method is presented for the evaluation of the pressure field which is induced in an acoustic fluid by the harmonic axisymmetrical excitation of a submerged thin elastic circular cylindrical ... -
Discussion: “Hydrostatic Extrusion” (Avitzur, B., 1965, ASME J. Eng. Ind., 87, pp. 487–493)
(The American Society of Mechanical Engineers (ASME), 1965) -
Discussion: “Optimum Diameter and Position of a Fly Cutter for Milling 0.45 C Steel, 195 BhN and 0.4 C Steel, 167 BhN at Light Cuts” (Hoshi, T., and Okushima, K., 1965, ASME J. Eng. Ind., 87, pp. 442–446)
(The American Society of Mechanical Engineers (ASME), 1965) -
Acoustic Emission During Athermal Martensitic Transformation in Steels
(The American Society of Mechanical Engineers (ASME), 1990)A relationship developed earlier between acoustic emission signals and the process of athermal martensitic transformation based on the free energy associated with the process is extended and ... -
A Study of Air-Jet Texturing Nozzles: The Effects of Nozzle Configuration on the Air Flow
(The American Society of Mechanical Engineers (ASME), 1990)A thorough investigation of the existing texturing nozzles will, no doubt, lead to the design of improved nozzles. This paper reports the experimental research carried on the scaled-up versions ... -
Investigation of Clamp Design for Temporary Attachment to Metal Pipe
(The American Society of Mechanical Engineers (ASME), 1990)A comparative study of different configurations of locator pads used to attach a portable piping lathe to a section of steel pipe was performed. The axial force exerted by adjustment screws ... -
Improved Methods for the Prediction of Chatter in Turning, Part 3: A Generalized Linear Theory
(The American Society of Mechanical Engineers (ASME), 1990)The linear theory of chatter has been generalized to any machining configuration without a priori assumptions on either the direction of the cutting force or the modal directions of the machine ... -
Analysis and Modeling of Laser Measurement System Performance for Wood Surface
(The American Society of Mechanical Engineers (ASME), 1990)An attempt was made to characterize roughness using a laser and an optical detector which outputs precise information about the roughness change. The performance of the laser detector system ...