Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 521-540 of 7723
-
Optimizing the Process Parameters for Additive Manufacturing of Glass Components by Selective Laser Melting: Soda-Lime Glass Versus Quartz Glass
(The American Society of Mechanical Engineers (ASME), 2021)Additive manufacturing by selective laser melting (SLM) is generally applicable to glasses while insufficient resistance of the material to thermal shocks due to local laser heating may result in cracking and a high viscosity ... -
Feed Direction-Dependent Milling Dynamics of an Asymmetric Flexible Machining System
(The American Society of Mechanical Engineers (ASME), 2021)Asymmetric flexible machining system has been widely used in numerical control machining. In traditional milling dynamics model, the cutter feed direction is usually defined as parallel to its vibration DOF, while the ... -
Multi-Material Integrated Three-Dimensional Printing of Cylindrical Li-Ion Battery
(The American Society of Mechanical Engineers (ASME), 2021)A simple, low-cost and highly efficient method of fabrication has always been the goal of manufacturing technology. In order to improve the speed of fabrication and simplify the preparation steps, this work proposes a ... -
Stochastic Method to Predict Effects of Roll Grinding Deviations on Sheet Flatness in Cold Rolling
(The American Society of Mechanical Engineers (ASME), 2021)Industrial measurements of the diameter profiles of work-rolls used in cold sheet rolling are applied with a stochastic roll-stack model to better understand how residual error from the roll grinding process affects the ... -
Microstructural and Mechanical Properties of a Solid-State Additive Manufactured Magnesium Alloy
(The American Society of Mechanical Engineers (ASME), 2021)In recent years, additive manufacturing (AM) has gained prominence in rapid prototyping and production of structural components with complex geometries. Magnesium alloys, which have a strength-to-weight ratio that is ... -
Evaluation of Arc Stability in Double-Wire DP-GMAW of Aluminum Alloy Based on U-I Graph
(The American Society of Mechanical Engineers (ASME), 2021)Severe arc interference in double-wire double pulsed gas metal arc welding (DP-GMAW) can affect the stability of the welding process. In this study, voltage and current waveforms during double-wire DP-GMAW of aluminum (Al) ... -
On Force–Displacement Characteristics and Surface Deformation in Piezo Vibration Striking Treatment
(The American Society of Mechanical Engineers (ASME), 2021)This paper presents an experimental study on a novel mechanical surface treatment process, namely piezo vibration striking treatment (PVST), which is realized by a piezo stack vibration device installed on a computer ... -
Sensor Fusion and On-Line Monitoring of Friction Stir Blind Riveting for Lightweight Materials Manufacturing
(The American Society of Mechanical Engineers (ASME), 2021)This research focused on developing a hybrid quality monitoring model through combining the data-driven and key engineering parameters to predict the friction stir blind riveting (FSBR) joint quality. The hybrid model was ... -
Semi-Supervised Learning for Anomaly Classification Using Partially Labeled Subsets
(The American Society of Mechanical Engineers (ASME), 2021)Machine learning and other data-driven methods have developed at a prolific rate for industrial applications due to the advent of industrial big data. However, industrial datasets may not be especially well-suited to ... -
Interplay Between Eutectic and Dendritic Growths Dominated by Si Content for Nb-Si-Ti Alloys Via Rapid Solidification
(The American Society of Mechanical Engineers (ASME), 2021)Rapid solidification techniques such as electron beam additive manufacturing are considered as promising pathways for manufacturing Nb-Si-based alloys for ultra-high-temperature applications. Here, we investigate the ... -
Evaluation of Additive Friction Stir Deposition for the Repair of Cast Al-1.4Si-1.1Cu-1.5Mg-2.1Zn
(The American Society of Mechanical Engineers (ASME), 2021)The deposition of new alloy to replace a worn or damaged surface layer is a common strategy for repairing or remanufacturing structural components. Solid-state methods, such as additive friction stir deposition (AFSD), ... -
The Effect of Carbon Fiber Types on Tool Wear During Edge Trimming of 0 deg, 45 deg, 90 deg, and 135 deg Carbon Fiber-Reinforced Plastic Laminates
(The American Society of Mechanical Engineers (ASME), 2021)Carbon fiber-reinforced plastics (CFRP) composites are difficult-to-machine materials due to extensive tool wear. This article investigates the impact of carbon fiber types on tool wear in edge-trimming CFRPs, each with ... -
Effect of Indirect Cryogenic Cooling on the Machining Accuracy and
(The American Society of Mechanical Engineers (ASME), 2021)Cutting deformation and cracks are common problems during the machining of -
Warm Forming Process for an AA5754 Train Window Panel
(The American Society of Mechanical Engineers (ASME), 2021)A warm forming process is designed for AA5754 to overcome low room temperature formability. The solution includes increased working temperature and is demonstrated with a railway vehicle component. A finite element (FE)-based ... -
Shear-Based Deformation Processing of Age-Hardened Aluminum Alloy for Single-Step Sheet Production
(The American Society of Mechanical Engineers (ASME), 2021)Shear-based deformation processing by hybrid cutting-extrusion and free machining are used to make continuous strip, of thickness up to 1 mm, from low-workability AA6013-T6 in a single deformation step. The intense shear ... -
Reversed-Torsion-Type Crush Energy Absorption Structure and Its Inexpensive Partial-Heating Torsion Manufacturing Method Based on Origami Engineering
(The American Society of Mechanical Engineers (ASME), 2021)Current vehicle energy absorbers face two problems during a collision in that there is only a 70% collapse in length and there is a high initial peak load. These problems arise because the presently used energy-absorbing ... -
B-Spline-Based Corner Smoothing Method to Decrease the Maximum Curvature of the Transition Curve
(The American Society of Mechanical Engineers (ASME), 2021)Toolpath represented by linear segments leads to tangency discontinuity between blocks, which results in fluctuation of feedrate and reduction of machining efficiency and quality. To eliminate these unwanted external ... -
Sorting of Poly-Disperse Particle by Entrapment Using Liquid Carrier System
(The American Society of Mechanical Engineers (ASME), 2021)A thin viscous layer is found over a substrate when it is immersed in a polymer solution. The layer thickness depends on the polymer and the solvent type, their volume fraction, and the substrate. If the liquid solution ... -
Visually Quantifiable Test Piece for Five-Axis Machine Tools Thermal Effects
(The American Society of Mechanical Engineers (ASME), 2021)Thermal deviation induced by ambient temperature changes and heat generated during machine operations influences the accuracy of machine tools. A thermal test is essential to evaluate the influence of thermal deviation. ... -
Multimodal Data-Driven Robot Control for Human–Robot Collaborative Assembly
(The American Society of Mechanical Engineers (ASME), 2022)In human–robot collaborative assembly, leveraging multimodal commands for intuitive robot control remains a challenge from command translation to efficient collaborative operations. This article investigates multimodal ...