Journal of Manufacturing Science and Engineering: Recent submissions

Now showing items 5061-5080 of 7723

    • A Grinding Power Model for Selection of Dressing and Grinding Conditions 

      Xun Chen; W. Brian Rowe; D. R. Allanson; B. Mills (The American Society of Mechanical Engineers (ASME), 1999)
      The grinding power is often used as a parameter for monitoring the grinding process. The power may also be used to monitor the effects of dressing. Empirical models are required to guide the ...

    • The Role of Flank Face Interference in Improving the Accuracy of Dynamic Force Predictions in Peripheral Milling 

      S. Ranganath; K. Narayanan; J. W. Sutherland (The American Society of Mechanical Engineers (ASME), 1999)
      An enhanced model for the dynamic behavior of the peripheral milling process is described. The model predicts the cutting forces and cutter deflections by including the effects of the flank ...

    • Analysis of Acoustic Emission Signals in Machining 

      S. T. S. Bukkapatnam; S. R. T. Kumara; A. Lakhtakia (The American Society of Mechanical Engineers (ASME), 1999)
      Acoustic emission (AE) signals are emerging as promising means for monitoring machining processes, but understanding their generation is presently a topic of active research; hence techniques to ...

    • Analytical Prediction of Stability Lobes in Ball End Milling 

      Y. Altıntaş; E. Shamoto; P. Lee; E. Budak (The American Society of Mechanical Engineers (ASME), 1999)
      The paper presents an analytical method to predict stability lobes in ball end milling. Analytical expressions are based on the dynamics of ball end milling with regeneration in the uncut chip ...

    • Tool Heat Transfer in Orthogonal Metal Cutting 

      V. Ostafiev; K. Weinert; S. Ostafiev; A. Kharkevich (The American Society of Mechanical Engineers (ASME), 1999)
      This paper analyzes heat flux transfer in the cutting tool in steady state orthogonal cutting. The method involves an iterative procedure to determine temperature distributions in the tool from ...

    • Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests 

      S. Lei; Y. C. Shin; F. P. Incropera (The American Society of Mechanical Engineers (ASME), 1999)
      This paper presents a procedure to characterize deformation behavior applicable to various engineering materials in machining processes. Orthogonal machining tests are used to obtain the relationship ...

    • Monitoring End-Mill Wear and Predicting Tool Failure Using Accelerometers 

      J. T. Roth; S. M. Pandit (The American Society of Mechanical Engineers (ASME), 1999)
      Autoregressive models are fit to end-milling acceleration data and the Data Dependent Systems methodology is utilized to isolate the modal energies of the first and second multiples of the tooth ...

    • Predicting Bearing Performance of Filled Teflon TFE Resins 

      R. B. Lewis (The American Society of Mechanical Engineers (ASME), 1967)
      The wear rates of filled compositions of Teflon can be reliably predicted using an experimentally determined wear factor if the bearing pressure, velocity, temperature, and geometry are known. ...

    • An Evaluation of Ploughing Models for Orthogonal Machining 

      D. J. Waldorf; R. E. DeVor; S. G. Kapoor (The American Society of Mechanical Engineers (ASME), 1999)
      An analytical comparison is made between two basic models of the flow of workpiece material around the edge of an orthogonal cutting tool during steady-state metal removal. Each has been the ...

    • Kinematic Synthesis of Plane Curves 

      D. W. Lewis; C. K. Gyory (The American Society of Mechanical Engineers (ASME), 1967)
      The coupler point curve of a plane mechanism is a curve that may be described by a series of paired coordinates. An extension of the method of “damped least squares” provides a means for ...

    • The Design of the Spherical Drag-Link Mechanism 

      A. H. Soni; L. Harrisberger (The American Society of Mechanical Engineers (ASME), 1967)
      The spherical drag-link mechanism has been designed using an approach based on minimum transmission angle. Explicit relationships have been derived for the required dimensions which satisfy the ...

    • Discussion: “Tensile and Short-Time Creep Properties of N-155 Alloy Sheet” (Bernett, Eugene C., 1960, ASME J. Eng. Ind., 82, pp. 283–300) 

      J. R. Kattus (The American Society of Mechanical Engineers (ASME), 1960)

    • Type Synthesis of Plane Linkages 

      L. S. Woo (The American Society of Mechanical Engineers (ASME), 1967)
      The type synthesis of plane linkages can be formulated as a systematic enumeration of linear graphs. In this study, the concepts of a “contraction map” of a graph and of enumeration technique ...

    • Some Applications of Graph Theory to the Structural Analysis of Mechanisms 

      L. Dobrjanskyj; F. Freudenstein (The American Society of Mechanical Engineers (ASME), 1967)
      Concepts in graph theory, which have been described elsewhere [2, 4, 6] have been applied to the development of (a) a computerized method for determining structural identity (isomorphism) between ...

    • Optimum Design of Curve-Generating Linkages With Inequality Constraints 

      R. L. Fox; K. D. Willmert (The American Society of Mechanical Engineers (ASME), 1967)
      The problem of synthesizing a four-bar linkage is presented as a mathematical programming problem. The objective is to synthesize a four-bar linkage whose coupler point will generate, as closely ...

    • Application of Dual Quaternions to the Study of Gyrodynamics 

      A. T. Yang (The American Society of Mechanical Engineers (ASME), 1967)
      Dual quaternions are used to derive equations of motion for an offset unsymmetrical gyroscope. From the equations, in view of the general characteristics of this six-degree-of-freedom system, ...

    • Torsional Vibrations in the Shafts of Linkage Mechanisms 

      W. Meyer zur Capellen (The American Society of Mechanical Engineers (ASME), 1967)
      Torsional vibrations in the input and output shafts of mechanisms are described by Hill’s differential equations. In this paper the equations are given and computer solutions, approximations, and ...

    • Analysis of the Time-Dependence of Multi-Freedom Mechanical Systems in Relative Coordinates 

      M. A. Chace (The American Society of Mechanical Engineers (ASME), 1967)
      A theoretical model and a computational procedure are proposed for the analysis of the time-dependence of highly constrained, multi-degree-of-freedom mechanical systems. Problems are formulated as ...

    • Balancing of High Speed Machinery 

      Chi-Yeh Han (The American Society of Mechanical Engineers (ASME), 1967)
      An analytical method for optimal balancing of the shaking forces and the shaking moments of force of any plane mechanism driven by a constant speed shaft is developed. The optimal values of ...

    • On the Screw Axes and Other Special Lines Associated With Spatial Displacements of a Rigid Body 

      B. Roth (The American Society of Mechanical Engineers (ASME), 1967)
      For a rigid body in two, three, four, and five finitely separated positions, the loci of the screw axes and other special lines are derived. It is shown that the classical planar theory is ...