Journal of Vibration and Acoustics: Recent submissions
Now showing items 3461-3480 of 3913
-
Energy and Finite Element Methods in Structural Mechanics
(The American Society of Mechanical Engineers (ASME), 1988) -
High Amplitude Sound Propagation at Low Frequencies in a Flow Duct Lined With Resonators: A Time Domain Solution
(The American Society of Mechanical Engineers (ASME), 1988)A quasi one-dimensional analysis of sound transmission in a flow duct lined with an array of nonlinear resonators is described. The solution to the equations describing the sound field and the ... -
A Method for the Improvement of Impact Printer Performance
(The American Society of Mechanical Engineers (ASME), 1988)The stored energy type of impact printer is a commonly used computer output device. It can be operated at quite high frequencies due to the fact that it has a large initial activation force. ... -
A Model of Categorization for Use in Automated Failure Analysis
(The American Society of Mechanical Engineers (ASME), 1988)Categorization is the procedure of determining set membership based on either necessary or statistically suggestive conditions for membership. This procedure lies at the heart of automated ... -
On the Dynamic Response of a Helical Geared System Subjected to a Static Transmission Error in the Form of Deterministic and Filtered White Noise Inputs
(The American Society of Mechanical Engineers (ASME), 1988)The vibration of a helical geared shaft system is studied, considering the coupling between the torsional, flexural, rotational (about the diametral axis), and axial motions of the gear carrying ... -
On Free Vibrations of a Thin Spinning Disk Stiffened With an Outer Reinforcing Ring
(The American Society of Mechanical Engineers (ASME), 1988)Thin spinning annular disks, which have widely varying applications ranging from inertial wheels in spacecraft to computer data storage devices, experience some inherent vibration problems during ... -
On the Transient Analysis of Rotor-Bearing Systems
(The American Society of Mechanical Engineers (ASME), 1988)The transient dynamic response of a flexible rotor in nonlinear supports has been investigated using time marching methods. Several marching techniques such as Newmark β, Wilson θ, and Houbolt ... -
Modelling and Control of Turbomachinery Vibrations
(The American Society of Mechanical Engineers (ASME), 1988)The authors describe an integrated approach to the modelling and active control of lateral vibrations in turbomachinery. Starting with consideration of the control of multiple rotor bending modes, ... -
Recent Developments in Multiple Input Modal Analysis
(The American Society of Mechanical Engineers (ASME), 1988)Over the last two decades in experimental modal analysis many different approaches have been developed for application to a great variety of structural engineering problems. The effectiveness of ... -
On the Vibration of a Point-Supported Linear Distributed System
(The American Society of Mechanical Engineers (ASME), 1988)The vibration of a constrained dynamical system, consisting of an Euler-Bernoulli beam with homogeneous boundary conditions, supported in its interior by arbitrarily located pin supports and ... -
Active Electromagnetic Suspension of an Elastic Rotor: Modelling, Control, and Experimental Results
(The American Society of Mechanical Engineers (ASME), 1988)Electromagnetic bearings can support a flexible rotor without any contact and simultaneously influence its dynamics. Such an active suspension and vibration control requires closed-loop control of ... -
Boundary Conditions and Sensitivities of Mass-Elastic Systems
(The American Society of Mechanical Engineers (ASME), 1988)It has been noted in numerous practical applications that the sensitivities of mass elastic systems to external disturbance are closely bound up with the nonzero values of the normalized boundary ... -
Dynamics in Civil Engineering (Vol. 1)
(The American Society of Mechanical Engineers (ASME), 1988) -
Discussion: “Acoustic Agglomeration of Power Plant Fly Ash for Environmental and Hot Gas Clean-up” (Reethof, G., 1988, ASME J. Vibr. Acoust. Stress Rel. Des., 110, pp. 552–557)
(The American Society of Mechanical Engineers (ASME), 1988) -
Modal Analysis: Theory & Application
(The American Society of Mechanical Engineers (ASME), 1988) -
Structural Modification of Advanced Turbomachine Blading by Dynamic Stiffness Matrix Operations
(The American Society of Mechanical Engineers (ASME), 1988)This paper examines the application of matrix transformations from the experimentally obtained receptance matrix to the dynamic stiffness matrix to determine changes of blade stiffness and/or mass ... -
Linear Systems and Digital Signal Processing
(The American Society of Mechanical Engineers (ASME), 1988) -
Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry Part II: Forced Vibrations
(The American Society of Mechanical Engineers (ASME), 1988)The effects of disorder on the forced response of nearly periodic structures with cyclic symmetry are investigated. The force model adopted here is relevant to blade assemblies. Perturbation ... -
Probabilistic Models of Cumulative Damage
(The American Society of Mechanical Engineers (ASME), 1988) -
The Transfer Matrix Impedance Coupling Method for the Eigensolutions of Multi-Spool Rotor Systems
(The American Society of Mechanical Engineers (ASME), 1988)In this paper, the transfer matrix impedance coupling method for calculating the eigensolutions of multi-spool rotor systems with several intershaft bearings is developed. This method can also ...