Journal of Applied Mechanics: Recent submissions
Now showing items 941-960 of 12181
-
Limits on Transformation Strains for Non-Negative Dissipation
(The American Society of Mechanical Engineers (ASME), 2019)We consider the maximum value of the magnitude of transformation strain for an Eshelby inclusion set by the requirement of non-negative dissipation. The general formulation for a linear elastic solid shows that the dissipation ... -
Improvement of Stiffness and Energy Absorption by Harnessing Hierarchical Interlocking in Brittle Polymer Blocks
(The American Society of Mechanical Engineers (ASME), 2019)The objective of the present work is to investigate the possibility of improving both stiffness and energy absorption in interlocking, architectured, brittle polymer blocks through hierarchical design. The interlocking ... -
Adhesive Joint Model for Delamination Analysis of a Co-Cured Composite Joint: Applicability and Limitation
(The American Society of Mechanical Engineers (ASME), 2019)Modeling the interface between two adherents in a co-cured composite joint for a delamination analysis is always a challenge since properties and thickness of the material forming the interface are not clearly defined or ... -
Elastic Wave Propagation in Open-Cell Foams
(The American Society of Mechanical Engineers (ASME), 2019)This work examines elastic wave propagation phenomena in open-cell foams with the use of the Bloch wave method and finite element analysis. Random foam topologies are generated with the Surface Evolver and subsequently ... -
A Refined JKR Model for Adhesion of a Rigid Sphere on a Soft Elastic Substrate
(The American Society of Mechanical Engineers (ASME), 2019)Surface energy outside the contact zone, which is ignored in the classical Johnson–Kendall–Roberts (JKR) model, can play an essential role in adhesion mechanics of soft bodies. In this work, based on a simple elastic ... -
Translation of a Coated Rigid Spherical Inclusion in an Elastic Matrix: Exact Solution, and Implications for Mechanobiology
(The American Society of Mechanical Engineers (ASME), 2019)The displacement of relatively rigid beads within a relatively compliant, elastic matrix can be used to measure the mechanical properties of the matrix. For example, in mechanobiological studies, magnetic or reflective ... -
Piezotronic Effect of a Thin Film With Elastic and Piezoelectric Semiconductor Layers Under a Static Flexural Loading
(The American Society of Mechanical Engineers (ASME), 2019)We theoretically study the electromechanical behaviors of a laminated thin-film piezoelectric semiconductor (PS) composite plate with flexural deformation. The nonlinear equations for drift currents of electrons and holes ... -
Kinetic to Potential Energy Transformation Using a Spring as an Intermediary: Application to the Pole Vault Problem
(The American Society of Mechanical Engineers (ASME), 2019)The kinetic energy of a mass moving horizontally can be completely converted into potential energy using a spring as an intermediary. The spring can be used to temporarily store some of the energy of the mass and change ... -
Irregular Hexagonal Cellular Substrate for Stretchable Electronics
(The American Society of Mechanical Engineers (ASME), 2019)The existing regular hexagonal cellular substrate for stretchable electronics minimizes the disruptions to the natural diffusive or convective flow of bio-fluids. Its anisotropy is insignificant, which is not ideal for ... -
Mechanics Design for Compatible Deformation of Fractal Serpentine Interconnects in High-Density Stretchable Electronics
(The American Society of Mechanical Engineers (ASME), 2019)Inorganic stretchable electronics based on the island-bridge layout have attracted great attention in recent years due to their excellent electrical performance under the extreme condition of large deformations. During the ... -
Tunable Two-Way Unidirectional Acoustic Diodes: Design and Simulation
(The American Society of Mechanical Engineers (ASME), 2019)Predeformation simultaneously changes the effective material stiffness as well as the geometric configuration and therefore may be utilized to tune wave propagation in soft phononic crystals (PCs). Moreover, the band gaps ... -
An Improved Design of the Substrate of Stretchable Gallium Arsenide Photovoltaics
(The American Society of Mechanical Engineers (ASME), 2019)A new design has been proposed and numerically analyzed for the polydimethylsiloxane (PDMS) substrate of gallium arsenide (GaAs) photovoltaics. A stack structure is realized by inserting a cube between island and basement, ... -
A Crack Close to and Perpendicular to an Interface: Resolution of Anomalous Behavior With a Cohesive Zone
(The American Society of Mechanical Engineers (ASME), 2019)In this investigation, we consider a crack close to and perpendicular to a bimaterial interface. If the crack tip is at the interface then, depending on material properties, the order of the stress singularity will be equal ... -
Closed-Form Coordinate-Free Decompositions of the Two-Dimensional Strain and Stress for Modeling Tension–Compression Dissymmetry
(The American Society of Mechanical Engineers (ASME), 2019)The modeling of the different mechanical behaviors of brittle and quasi-brittle materials in tension and compression leads to partitioning of the strain (or stress) tensor into a positive part and a negative part. In this ... -
Analytical Form-Finding for Highly Symmetric and Super-Stable Configurations of Rhombic Truncated Regular Polyhedral Tensegrities
(The American Society of Mechanical Engineers (ASME), 2019)Tensegrities have exhibited great importance and numerous applications in many mechanical, aerospace, and biological systems, for which symmetric configurations are preferred as the tensegrity prototypes. Besides the ... -
Local Stress-Field Reconstruction Around Holes in a Plate Using Strain Monitoring Data and Stress Function
(The American Society of Mechanical Engineers (ASME), 2019)This study reconstructs a two-dimensional stress field from measured strain data. The advantage of using stress functions is that the stress equilibrium and strain compatibility are automatically satisfied. We use the ... -
Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator
(The American Society of Mechanical Engineers (ASME), 2019)Compared to robots and devices made of rigid components, soft robots and flexible devices driven by soft active materials possess various advantages including high adaptability under extreme environment and compatibility ... -
Deployment of a Membrane Attached to Two Axially Moving Beams
(The American Society of Mechanical Engineers (ASME), 2019)The deployment dynamics of a simplified solar sail quadrant consisting of two Euler–Bernoulli beams and a flexible membrane are studied. Upon prescribing the in-plane motion and modeling the tension field based on linearly ... -
2018 Timoshenko Medal Acceptance Lecture: Academic Family
(The American Society of Mechanical Engineers (ASME), 2019) -
Schallamach Wave-Induced Instabilities in a Belt-Drive System
(The American Society of Mechanical Engineers (ASME), 2019)We experimentally study the dynamic behavior of a belt-drive system to explore the effect of loading conditions, driving speed, and system inertia on both the frequency and amplitude of the observed frictional and rotational ...