Journal of Applied Mechanics: Recent submissions
Now showing items 901-920 of 12181
-
An Innovative Approach of Using Continuous Impedance-Graded Metallic Composite System for Attenuation of Stress Waves
(American Society of Mechanical Engineers (ASME), 2019)This paper presents an innovative approach of stress attenuation through a continuous impedance-graded material system for high strain-rate events. High energetic dynamic events such as blasts and impact could cause stress ... -
Belt-Drive Mechanics: Friction in the Absence of Sliding
(American Society of Mechanical Engineers (ASME), 2019)Recent studies have shown that steady and unsteady operation of a belt drive may exhibit regimes absent of sliding at the belt–pulley interface, where instead detachment waves serve to relax stress in the so-called “slip” ... -
Proof of the Splitting Mode of Compressive Brittle Failure and Integration With General Failure Theory
(American Society of Mechanical Engineers (ASME), 2019)The problem of special interest is the nature of the mode of failure in uniaxial compression at the brittle limit. This problem is known by observation to undergo a splitting mode of failure. The present work gives a full ... -
Temperature-Dependent Interfacial Debonding and Frictional Behavior of Fiber-Reinforced Polymer Composites
(American Society of Mechanical Engineers (ASME), 2019)As fiber-reinforced polymer matrix composites are often cured from stress-free high temperature, when subjected to ambient temperature, both the mismatch of the coefficient of linear thermal expansion between the fiber and ... -
A Refined JKR Model for Adhesion of a Rigid Sphere on a Soft Elastic Substrate
(American Society of Mechanical Engineers (ASME), 2019)Surface energy outside the contact zone, which is ignored in the classical Johnson–Kendall–Roberts (JKR) model, can play an essential role in adhesion mechanics of soft bodies. In this work, based on a simple elastic ... -
Mesoscale Analysis of Homogeneous Dislocation Nucleation
(American Society of Mechanical Engineers (ASME), 2019)We perform atomistic simulations of dislocation nucleation in two-dimensional (2D) and three-dimensional (3D) defect-free hexagonal crystals during nanoindentation with circular (2D) or spherical (3D) indenters. The incipient ... -
Passive Alignment Method for the Bonding of Flat Surfaces Using a Squeeze Flow
(American Society of Mechanical Engineers (ASME), 2019)A method to passively align bonded components without direct mechanical contact has been developed. This method uses the pressure field generated by the squeeze flow between the parts during the bonding process to increase ... -
Design of an Impedance-Graded Metallic Composite System as a Protective Mechanism for Concrete Structures
(American Society of Mechanical Engineers (ASME), 2019)Protecting concrete structures from high energetic dynamic events such as blasts and impact is a major concern, in both civil- and military-related applications. Most conventional techniques fail to counter the unpredictable ... -
A Mock Gas Molecules Model for Accurately Simulating Pressure Load at Micro- and Nanoscales
(American Society of Mechanical Engineers (ASME), 2019)At micro- and nanoscales, the gas pressure load is generally simulated by the thermal motion of gas molecules. However, the pressure load can hardly be produced or controlled accurately, because the effects of the wall ... -
A Floquet-Based Bar-Spring Model for the Dynamic Modulus of Bioinspired Composites With Arbitrary Staggered Architectures
(American Society of Mechanical Engineers (ASME), 2019)Staggered architectures widely seen in load-bearing biological materials provide not only excellent supporting functions resisting static loading but also brilliant protecting functions attenuating the dynamic impact. ... -
Mode I and II Interlaminar Fracture in Laminated Composites: A Size Effect Study
(American Society of Mechanical Engineers (ASME), 2019)This work investigates the mode I and II interlaminar fracturing behavior of laminated composites and the related size effects. Fracture tests on geometrically scaled double cantilever beam (DCB) and end notch flexure (ENF) ... -
Interlayer Attraction Force in Concentric Carbon Nanotubes
(American Society of Mechanical Engineers (ASME), 2019)The interlayer attraction force between concentric carbon nanotubes (CNTs) plays an important role in CNT-based nanodevices. However, the precise measurement of the interlayer attraction force remains to date a challenge. ... -
Translation of a Coated Rigid Spherical Inclusion in an Elastic Matrix: Exact Solution, and Implications for Mechanobiology
(American Society of Mechanical Engineers (ASME), 2019)The displacement of relatively rigid beads within a relatively compliant, elastic matrix can be used to measure the mechanical properties of the matrix. For example, in mechanobiological studies, magnetic or reflective ... -
Coulomb Friction Crawling Model Yields Linear Force–Velocity Profile
(American Society of Mechanical Engineers (ASME), 2019)Conventional wisdom would have it that moving mechanical systems that dissipate energy by Coulomb friction have no relationship between force and average speed. One could argue that the work done by friction is constant ... -
Random Fiber Networks With Superior Properties Through Network Topology Control
(American Society of Mechanical Engineers (ASME), 2019)In this work, we study the effect of network architecture on the nonlinear elastic behavior and strength of athermal random fiber networks of cellular type. We introduce a topology modification of Poisson–Voronoi (PV) ... -
Metamaterial With Local Resonators Coupled by Negative Stiffness Springs for Enhanced Vibration Suppression
(American Society of Mechanical Engineers (ASME), 2019)In recent years, metamaterials for the applications in low-frequency vibration suppression and noise reduction have attracted numerous research interests. This paper proposes a metamaterial system with local resonators ... -
Out-of-Plane Impact Resistance Enhancement in Plane Lattice With Curved Links
(American Society of Mechanical Engineers (ASME), 2019)In the past decades, various novel functions (i.e., negative Poisson's ratio, zero thermal expansion) have been obtained by tailoring the microstructures of the cellular structures. Among all the microstructures, the ... -
Newmark-Beta Method in Discrete Elastic Rods Algorithm to Avoid Energy Dissipation
(American Society of Mechanical Engineers (ASME), 2019)Discrete elastic rods (DER) algorithm presents a computationally efficient means of simulating the geometrically nonlinear dynamics of elastic rods. However, it can suffer from artificial energy loss during the time ... -
Multistable Cosine-Curved Dome System for Elastic Energy Dissipation
(American Society of Mechanical Engineers (ASME), 2019)This paper presents a new energy dissipation system composed of multistable cosine-curved domes (CCD) connected in series. The system exhibits multiple consecutive snap-through and snap-back buckling behavior with a ... -
Mechanical Characteristics of Origami Mechanism Based on Thin Plate Bending Theory
(American Society of Mechanical Engineers (ASME), 2019)This paper introduces a method for calculating the deformation displacement of the origami mechanism. The bearing capacity of each face can be analyzed by the relationship between the stress and displacement, which can ...