Journal of Applied Mechanics: Recent submissions
Now showing items 821-840 of 12181
-
Theoretical Modeling and Exact Solution for Extreme Bending Deformation of Hard-Magnetic Soft Beams
(The American Society of Mechanical Engineers (ASME), 2020)Hard-magnetic soft materials (HMSMs) manufactured by embedding hard-magnetic particles in soft materials belong to a new type of soft active materials. The abilities of fast and complicated transformations of hard-magnetic ... -
Guiding and Trapping Cracks With Compliant Inclusions for Enhancing Toughness of Brittle Composite Materials
(The American Society of Mechanical Engineers (ASME), 2020)The problem of toughening heterogeneous materials with a stiff matrix and compliant inclusions is investigated through numerical simulations and experiments. Specifically, the problem of optimizing a combination of effective ... -
Size Scaling of Plastic Deformation in Simple Shear: Fractional Strain-Gradient Plasticity and Boundary Effects in Conventional Strain-Gradient Plasticity
(The American Society of Mechanical Engineers (ASME), 2020)A recently developed model based on fractional derivatives of plastic strain is compared with conventional strain-gradient plasticity (SGP) models. Specifically, the experimental data and observed model discrepancies in ... -
The Interaction of Frictional Slip and Adhesion for a Stiff Sphere on a Compliant Substrate
(The American Society of Mechanical Engineers (ASME), 2020)How friction affects adhesion is addressed. The problem is considered in the context of a very stiff sphere adhering to a compliant, isotropic, linear elastic substrate and experiencing adhesion and frictional slip relative ... -
Failure in Two-Dimensional Materials: Defect Sensitivity and Failure Criteria
(The American Society of Mechanical Engineers (ASME), 2020)Two-dimensional (2D) materials have attracted a great deal of attention recently owing to their fascinating structural, mechanical, and electronic properties. The failure phenomena in 2D materials can be diverse and ... -
Recent Milestones in Unraveling the Full-Field Structure of Dynamic Shear Cracks and Fault Ruptures in Real-Time: From Photoelasticity to Ultrahigh-Speed Digital Image Correlation
(The American Society of Mechanical Engineers (ASME), 2020)The last few decades have seen great achievements in dynamic fracture mechanics. Yet, it was not possible to experimentally quantify the full-field behavior of dynamic fractures, until very recently. Here, we review our ... -
Special Issue: Proceedings of the Century Fracture Mechanics Summit
(The American Society of Mechanical Engineers (ASME), 2020)This proceedings collects selected articles based on presentations at the Century Fracture Mechanics Summit (CFMS), which was held in Singapore from Apr. 8–10, 2019. Since Griffith’s landmark work of 100 years ago, the ... -
Modeling of Flexible Beam Networks and Morphing Structures by Geometrically Exact Discrete Beams
(The American Society of Mechanical Engineers (ASME), 2020)We demonstrate how a geometrically exact formulation of discrete slender beams can be generalized for the efficient simulation of complex networks of flexible beams by introducing rigid connections through special junction ... -
Analytical Solutions for the Lateral-Torsional Buckling of Serpentine Interconnects in Stretchable Electronics
(The American Society of Mechanical Engineers (ASME), 2020)Serpentine interconnects, as an integral part of island-bridge layouts, enable extremely large reversible deformation under the action of mechanical loads and are thus widely used in the emerging new field of stretchable ... -
Elastohydrodynamic Lubrication Line Contact Based on Surface Elasticity Theory
(The American Society of Mechanical Engineers (ASME), 2020)Using surface elasticity theory, this article first analyzes the surface effect on the elastohydrodynamic lubrication (EHL) line contact between an elastic half-plane and a rigid cylindrical punch. In this theory, the ... -
Learning Nonlinear Constitutive Laws Using Neural Network Models Based on Indirectly Measurable Data
(The American Society of Mechanical Engineers (ASME), 2020)Artificial neural network (ANN) models are used to learn the nonlinear constitutive laws based on indirectly measurable data. The real input and output of the ANN model are derived from indirect data using a mechanical ... -
Time-Dependent Stresses From Fluid Extraction and Diffusion With Applications to Induced Seismicity
(The American Society of Mechanical Engineers (ASME), 2020)Over recent decades, it has become clear that the extraction of fluids from underground reservoirs can be linked to seismicity and aseismic deformation around producing fields. Using a simple model with uniform fluid ... -
A Spectral Microplane Model for the Anisotropic Damage Behavior of Shales
(The American Society of Mechanical Engineers (ASME), 2020)The development of constitutive models for shales has been a challenge for decades due to the difficulty of characterizing the strongly anisotropic macroscopic behavior related to the inherent mesostructure and damage ... -
Influence of Lateral Constraints on Wave Propagation in Finite Granular Crystals
(The American Society of Mechanical Engineers (ASME), 2020)In the presented work, wave dynamics of 2D finite granular crystals of polyurethane cylinders under low-velocity impact loading was investigated to gain better understanding of the influence of lateral constraints. The ... -
Nonlinear Visco-Poroelasticity of Gels With Different Rheological Parts
(The American Society of Mechanical Engineers (ASME), 2020)A polymeric gel contains a crosslinked polymer network and solvent. Gels can swell or shrink in response to external stimuli. Two typical kinetic processes are involved during the deformation of gels: the viscoelastic and ... -
Enhancement of Deep-Subwavelength Band Gaps in Flat Spiral-Based Phononic Metamaterials Using the Trampoline Phenomena
(The American Society of Mechanical Engineers (ASME), 2020)Elastic and acoustic metamaterials can sculpt dispersion of waves through resonances. In turn, resonances can give rise to negative effective properties, usually localized around the resonance frequencies, which support ... -
Kinetics-Induced Morphing of Three-Dimensional-Printed Gel Structures Based on Geometric Asymmetry
(The American Society of Mechanical Engineers (ASME), 2020)Emerging three-dimensional (3D) printing techniques for soft active materials have demonstrated fascinating applications in various areas including programmable and reconfigurable structures, tissue engineering, and soft ... -
Modeling of the Photo-Thermal-pH Triple-Responsive Hydrogels Considering the Coupled Effect of Photothermal Conversion and Electrochemistry
(The American Society of Mechanical Engineers (ASME), 2020)Photo-thermal-pH triple-responsive hydrogels are special kinds of smart materials which can respond to changes in ambient temperature, pH, and light intensity simultaneously. In this paper, a field theory is developed for ... -
Specialized Strain Energy Functions for Modeling the Contribution of the Collagen Network (Waniso) to the Deformation of Soft Tissues
(The American Society of Mechanical Engineers (ASME), 2020)A popular framework in continuum mechanics modeling of soft tissues is the use of an additive split of the total strain energy function (W) into the contribution of the isotropic matrix (Wiso) and the anisotropic collagen ... -
Computational Model and Design of the Soft Tunable Lens Actuated by Dielectric Elastomer
(The American Society of Mechanical Engineers (ASME), 2020)Inspired by the accommodation mechanism of the human eye, several soft tunable lenses have been fabricated and demonstrated the capability of controllable focus tuning. This paper presents a computational model of a ...