Journal of Applied Mechanics: Recent submissions
Now showing items 721-740 of 12181
-
A Method to Determine the Geometry-Dependent Bending Stiffness of Multilayer Graphene Sheets
(The American Society of Mechanical Engineers (ASME), 2020)We consider how the bending stiffness of a multilayer graphene sheet relies on its bending geometry, including the in-plane length L and the curvature κ. We use an interlayer shear model to characterize the periodic ... -
Enhanced Pseudo-Three-Dimensional Model for Multiple Hydraulic Fractures
(The American Society of Mechanical Engineers (ASME), 2020)Modeling the propagation of hydraulic fractures is a complex problem that involves solving the equations that describe the intimate coupling between the cracked and porous solid phase and the fracturing fluid that drives ... -
Poroelastic Effects on the Time- and Rate-Dependent Fracture of Polymer Gels
(The American Society of Mechanical Engineers (ASME), 2020)Fracture of polymer gels is often time- and rate-dependent. Subject to a constant load, a gel specimen may fracture immediately or after a delay (time-dependent, delayed fracture). When a crack grows in a gel, the fracture ... -
Full Three-Dimensional Cavitation Instabilities Using a Non-Quadratic Anisotropic Yield Function
(The American Society of Mechanical Engineers (ASME), 2020)Full three-dimensional cell models containing a small cavity are used to study the effect of plastic anisotropy on cavitation instabilities. Predictions for the Barlat-91 model (Barlat et al., 1991, “A Six-Component Yield ... -
The Stiffness-Threshold Conflict in Polymer Networks and a Resolution
(The American Society of Mechanical Engineers (ASME), 2020)Stiffness and fatigue threshold are important material parameters in load-carrying applications. However, it is impossible to achieve both high stiffness and high threshold for single-network elastomers and single-network ... -
Mode II Fracture of an Elastic-Plastic Sandwich Layer
(The American Society of Mechanical Engineers (ASME), 2020)The shear strength of a pre-cracked sandwich layer is predicted, assuming that the layer is linear elastic or elastic-plastic, with yielding characterized either by the J2 plasticity theory or by a strip-yield model. The ... -
Thermoviscoplasticity in Body-Centered Cubic Metals: A Two-Temperature Model With Grain Boundary Evolution
(The American Society of Mechanical Engineers (ASME), 2020)In this work, we develop a thermo-viscoplasticity model for body-centered cubic (BCC) metals based on a two-temperature theory of nonequilibrium thermodynamics. Modeling the plastic deformation here involves two subsystems, ... -
Apparent Flexoelectricity Due to Heterogeneous Piezoelectricity
(The American Society of Mechanical Engineers (ASME), 2020)Recent work has highlighted how the phenomenon of flexoelectricity can masquerade as piezoelectricity. This notion can not only be exploited to create artificial piezoelectric-like materials without using piezoelectric ... -
A New Elastic Theory of Nanocomposites With Incoherent Interface Effect Based on Interface Energy Density
(The American Society of Mechanical Engineers (ASME), 2020)A continuum theory of elasticity based on the concept of interface free energy density is proposed to account for the effect of incoherent interfaces in nano-phase reinforced composites. With the help of the lattice model, ... -
The Shape of a Photo-Actuated Pyramidal Cone
(The American Society of Mechanical Engineers (ASME), 2020)Polydomain nematic sheets can be designed for desired shape transition, and a typical example is a disc composed of congruent wedges with rank-1 connected director field. Recent theoretical study indicated that such a disc, ... -
Free and Forced Oscillations of Magnetic Liquids Under Low-Gravity Conditions
(The American Society of Mechanical Engineers (ASME), 2020)The sloshing of liquids in microgravity is a relevant problem of applied mechanics with important implications for spacecraft design. A magnetic settling force may be used to avoid the highly non-linear dynamics that ... -
On the Nonlinear Snap-Through of Arch-Shaped Clamped–Clamped Bistable Beams
(The American Society of Mechanical Engineers (ASME), 2020)Bistable compliant elements offer excellent advantages in many applications ranging from high precision sensing to energy harvesting. The essential nonlinear mechanics of such elements are strongly coupled with their ... -
General Fishnet Statistics of Strength: Nacreous, Biomimetic, Concrete, Octet-Truss, and Other Architected or Quasibrittle Materials
(The American Society of Mechanical Engineers (ASME), 2020)The fishnet probabilistic model was recently developed to characterize the strength distribution of nacre-like biomimetic materials. It reveals that the unique fishnet-like connectivity of the material microstructure brings ... -
Buckling Thresholds for Pre-Loaded Spherical Shells Subject to Localized Blasts
(The American Society of Mechanical Engineers (ASME), 2020)This paper investigates the robustness against localized impacts of elastic spherical shells pre-loaded under uniform external pressure. We subjected a pre-loaded spherical shell that is clamped at its equator to axisymmetric ... -
Stephen P. Timoshenko Medal Acceptance Speech
(The American Society of Mechanical Engineers (ASME), 2020)Presented at the ASME Applied Mechanics Division Banquet, IMECE’19, Salt Lake City, UT, Nov. 12, 2019.The Timoshenko Medal was established by ASME in 1957 to recognize the enormous and distinguished works and legacy of ... -
The Failure Theory for Isotropic Materials: Proof and Completion
(The American Society of Mechanical Engineers (ASME), 2020)This work represents the completion of the many developments in recent years on failure theory for homogeneous and isotropic materials. Presented here is the resulting failure formalism in final and technically complete ... -
An Atomistic Perspective on the Effect of Strain Rate and Lithium Fraction on the Mechanical Behavior of Silicon Electrodes
(The American Society of Mechanical Engineers (ASME), 2020)The process of charging and discharging of lithium-ion batteries results in the periodic intercalation and ejection of lithium ions in the anode material. High-capacity anode materials that are of significant interest for ... -
Engineer Energy Dissipation in 3D Graphene Nanolattice Via Reversible Snap-Through Instability
(The American Society of Mechanical Engineers (ASME), 2020)Carbon micro/nanolattice materials, defined as three-dimensional (3D) architected metamaterials made of micro/nanoscale carbon constituents, have demonstrated exceptional mechanical properties, including ultrahigh specific ... -
Efficient Broadband Vibration Energy Harvesting Using Multiple Piezoelectric Bimorphs
(The American Society of Mechanical Engineers (ASME), 2020)This paper presents complete nonlinear electromechanical models for energy harvesting devices consisting of multiple piezoelectric bimorphs (PBs) connected in parallel and series, for the first time. The proposed model is ... -
Buckling of an Elastic Plate/Layer Along a Rigid Base With Adhesion
(The American Society of Mechanical Engineers (ASME), 2020)An infinitely long elastic plate/layer is under uniaxial compression with its long dimension held by adhesion to a flat rigid base without friction. A prescribed length of the plate/layer is free of adhesion. This configuration ...