Journal of Applied Mechanics: Recent submissions
Now showing items 1201-1220 of 12181
-
Modeling Air Entrainment and Temperature Effects in Winding
(The American Society of Mechanical Engineers (ASME), 2018)Rolls of films and paper are routinely stored under varying conditions before being unwound into downstream operations. During storage, interlayer pressures can change relative to the pressures generated during winding. ... -
Effects of Plastic Anisotropy and Void Shape on Full Three-Dimensional Void Growth
(The American Society of Mechanical Engineers (ASME), 2018)Void growth in an anisotropic ductile solid is studied by numerical analyses for three-dimensional (3D) unit cells initially containing a void. The effect of plastic anisotropy on void growth is the main focus, but the ... -
Rate-Dependent Scaling of Dynamic Tensile Strength of Quasibrittle Structures
(The American Society of Mechanical Engineers (ASME), 2018)This paper investigates the effect of strain rate on the scaling behavior of dynamic tensile strength of quasibrittle structures. The theoretical framework is anchored by a rate-dependent finite weakest link model. The ... -
On the Strain Saturation Conditions for Polycrystalline Ferroelastic Materials
(The American Society of Mechanical Engineers (ASME), 2018)A phenomenological constitutive law is developed for the deformation of polycrystalline ferroelastic materials. The model is framed within a thermodynamic setting common to internal variable plasticity. The two significant ... -
Higher-Order Beam Theories for Mode II Fracture of Unidirectional Composites
(The American Society of Mechanical Engineers (ASME), 2018)Mathematical models, for the stress analyses of unidirectional end notch flexure and end notch cantilever specimens using classical beam theory, first, second, and third-order shear deformation beam theories, have been ... -
Local Solutions in Potential Theory and Linear Elasticity Using Monte Carlo Methods
(The American Society of Mechanical Engineers (ASME), 2018)A numerical method called the boundary walk method is described in this paper. The boundary walk method is a local method in the sense that it directly gives the solution at the point of interest. It is based on a global ... -
Optimization of Structures Made From Composites With Elliptical Inclusions
(The American Society of Mechanical Engineers (ASME), 2018)This paper seeks to determine the relationship between the parameters that define microstructures composed of a matrix with periodic elliptical inclusions and the effectiveness of structural optimization through the ... -
Mechanical Response of Two-Dimensional Polymer Networks: Role of Topology, Rate Dependence, and Damage Accumulation
(The American Society of Mechanical Engineers (ASME), 2018)The skeleton of many natural and artificial soft materials can be abstracted as networks of fibers/polymers interacting in a nonlinear fashion. Here, we present a numerical model for networks of nonlinear, elastic polymer ... -
Equilibrium and Belt-Pulley Vibration Coupling in Serpentine Belt Drives
(The American Society of Mechanical Engineers (ASME), 2018)Serpentine belt drives with spring-loaded tensioners are now widely used in the automotive industry. Experimental measurements show that linear system vibration coupling exists between the pulley rotations and the transverse ... -
Buckling of Multilayer Graphene Sheets Subjected to Axial Compression Based on a Continuum Mechanics Model
(The American Society of Mechanical Engineers (ASME), 2018)Buckling of multilayer graphene sheets (MLGSs) subjected to an axial compressive load in plane-strain condition is studied. Closed-form solutions for buckling load of MLGSs are obtained based on a continuum model for MLGSs. ... -
Approximate Model for a Viscoelastic Oscillator
(The American Society of Mechanical Engineers (ASME), 2018)An oscillator where the restoring force is furnished by a viscoelastic bar and therefore depends on the history of the motion is considered. The history-dependent force is characterized by a relaxation modulus and a ... -
An Overset Finite-Element Large-Eddy Simulation Method With Applications to Turbomachinery and Aeroacoustics
(The American Society of Mechanical Engineers (ASME), 2018)A numerical method for the prediction of an unsteady fluid flow in a complex geometry that involves moving boundary interfaces is presented in this paper. The method is also applicable to the prediction of the far-field ... -
The Initial Post-buckling Behavior of Face-Sheet Delaminations in Sandwich Composites
(The American Society of Mechanical Engineers (ASME), 2018)Should an interface crack between the layers of the composite face-sheet or between the core and the composite face-sheet of a sandwich beam/plate exists, local buckling and possible subsequent growth of this interface ... -
Micromechanical Progressive Failure Analysis of Fiber-Reinforced Composite Using Refined Beam Models
(The American Society of Mechanical Engineers (ASME), 2018)An efficient and novel micromechanical computational platform for progressive failure analysis of fiber-reinforced composites is presented. The numerical framework is based on a recently developed micromechanical platform ... -
Delamination of a Thin Film Driven by a Flat Cylindrical Shaft
(The American Society of Mechanical Engineers (ASME), 2018)An analytical model is derived for the delamination of a thin film from a rigid substrate by a cylindrical shaft with a flat end and finite radius. We show that, within certain limitations, a point-load model can be applied ... -
Discrete Loading Ring-Core Method for Nonuniform In-Plane Residual Stress Analysis in Micro Area
(The American Society of Mechanical Engineers (ASME), 2018)The ring-core method is often used in residual stress analysis. It is applied to macro- and microscale stress analysis and has a unique advantage of releasing the residual stress across the core instead of at a single ... -
Plane Contact and Adhesion of Two Elastic Solids With an Interface Groove
(The American Society of Mechanical Engineers (ASME), 2018)A systematic study is performed on the plane contact and adhesion of two elastic solids with an interface groove. The nonadhesion and Johnson–Kendall–Roberts (JKR) adhesion solutions for a typical groove shape are obtained ... -
Experimentally Calibrated Abrasive Sliding Wear Model: Demonstrations for Rotary and Linear Wear Systems
(The American Society of Mechanical Engineers (ASME), 2018)Considerable effort has been made to model, predict, and mitigate wear as it has significant global impact on the environment, economy, and energy consumption. This work proposes generalized foundation-based wear models ... -
A Solution of Rigid Perfectly Plastic Cylindrical Indentation in Plane Strain and Comparison to Elastic-Plastic Finite Element Predictions With Hardening
(The American Society of Mechanical Engineers (ASME), 2018)The indentation of flat surfaces deforming in the plastic regime by various geometries has been well studied. However, there is relatively little work investigating cylinders indenting plastically deforming surfaces. This ... -
General Solution for Mechanical and Thermal Stresses in a Functionally Graded Hollow Cylinder due to Nonaxisymmetric Steady-State Loads
(The American Society of Mechanical Engineers (ASME), 2018)In this paper, the general theoretical analysis of two-dimensional steady-state thermal stresses for a hollow thick cylinder made of functionally graded material is developed. The temperature distribution is assumed to be ...