Journal of Pressure Vessel Technology: Recent submissions
Now showing items 1961-1980 of 4506
-
Failure Analysis of a 9–12%Cr Steel Superheater Tube
(The American Society of Mechanical Engineers (ASME), 2009)The failure analysis of 9–12% chromium steel tubes, containing about 2.5% molybdenum, is discussed in the present study. The component is used in a steam power plant boiler as a high-temperature ... -
Simplified Stress Categorization Using a Single Linear Elastic Analysis
(The American Society of Mechanical Engineers (ASME), 2009)The ASME Boiler and Pressure Vessel Code (code) provides guidelines for the classification of linear elastic stresses into primary, secondary, and peak stresses. Although these guidelines cover ... -
Erratum: Retraction: “Estimates of Elastic Crack Opening Displacements of Slanted Through-Wall Cracks in Plate and Cylinder” [Journal of Pressure Vessel and Technology, 2009, 131(6), p. 061404]
(The American Society of Mechanical Engineers (ASME), 2009)This paper was retracted from Volume 131, Issue 6, Journal of Pressure Vessel and Technology because it is scheduled to be published in the April issue 2010. -
Weight Minimization of Natural Gas Distribution Riser Systems
(The American Society of Mechanical Engineers (ASME), 2009)This study investigates the optimal piping layout in the installation of residential natural gas riser piping systems subjected to daily temperature fluctuations. Specifically, it is desired to ... -
Steady-State Creep Analysis of Thick-Walled Spherical Pressure Vessels With Varying Creep Properties
(The American Society of Mechanical Engineers (ASME), 2008)Based on basic equations of steady-state creep of spherically symmetric problems, a simple and efficient iterative method is proposed in this paper to determine creep deformations and stresses ... -
High Pressure Steel Storage Vessels Used in Hydrogen Refueling Station
(The American Society of Mechanical Engineers (ASME), 2008)The storage of hydrogen in a compressed gaseous form offers the simplest solution in terms of infrastructure requirements and has become the most popular and most highly developed hydrogen ... -
Burst Analysis of Cylindrical Shells
(The American Society of Mechanical Engineers (ASME), 2008)The purpose of this paper is to demonstrate that the burst pressure of a cylindrical shell subjected to internal pressure can be accurately predicted by using finite element method. The computer ... -
Influence of the Interaction on Stress Intensity Factor of Semielliptical Surface Cracks
(The American Society of Mechanical Engineers (ASME), 2008)The interaction between multiple surface cracks is an important consideration in the cracking behavior due to thermal fatigue and stress corrosion cracking. However, it is difficult to evaluate ... -
Neutron Diffraction Evaluation of Residual Stress for Several Welding Arrangements and Comparison With Fitness-for-Purpose Assessments
(The American Society of Mechanical Engineers (ASME), 2008)In this research, the neutron diffraction technique was used to investigate and compare the residual stress characteristics in several weld arrangements. This research has focused on the effects ... -
Editorial
(The American Society of Mechanical Engineers (ASME), 2008)Belated Happy New Year and my best wishes for good health and happiness in 2008. We begin the year with many new and exciting things happening at JPVT. -
Editorial
(The American Society of Mechanical Engineers (ASME), 2008)This issue of the Journal of Pressure Vessel Technology highlights pipeline technology. It contains selected papers from the biennial International Pipeline Conference held in Calgary Canada in ... -
Investigation of Fatigue Crack Propagation in Line Pipes Containing an Angled Surface Flaw
(The American Society of Mechanical Engineers (ASME), 2008)The angled crack problem has been given special attention in the recent years by fracture mechanics investigators due to its close proximity to realistic conditions in engineering structures. ... -
Buckling of Externally Pressurized Prolate Ellipsoidal Domes
(The American Society of Mechanical Engineers (ASME), 2008)Details are given of a numerical and experimental study into buckling of steel ellipsoidal domes loaded by static external pressure. A range of geometries and thicknesses of domes is examined, ... -
A Proposed Model for Creep Relaxation of Soft Gaskets in Bolted Joints at Room Temperature
(The American Society of Mechanical Engineers (ASME), 2008)A mathematical model is proposed for predicting the residual clamp load during creep and∕or relaxation in gasketed joints. An experimental procedure is developed to verify the proposed model for ... -
Failure Mode and Failure Strengths for Wall Thinning Straight Pipes and Elbows Subjected to Seismic Loading
(The American Society of Mechanical Engineers (ASME), 2008)It is important to assess the failure strengths for pipes with wall thinning to maintain the integrity of the piping systems and to make codification of allowable wall thinning. Full-scale ... -
Correlation Between Vibration Excitation Forces and the Dynamic Characteristics of Two-Phase Cross Flow in a Rotated-Triangular Tube Bundle
(The American Society of Mechanical Engineers (ASME), 2008)Two-phase cross flow exists in many shell-and-tube heat exchangers. Flow-induced vibration excitation forces can cause tube motion that will result in long-term fretting wear or fatigue. Detailed ... -
A New Approach for Bimaterial Interface Fracture Toughness Evaluation
(The American Society of Mechanical Engineers (ASME), 2008)A material configuration of central importance in composite materials or in protective coating technology is a thin film of one material deposited onto a substrate of a different material. ... -
Experimental Investigation of the Location of Maximum Erosive Wear Damage in Elbows
(The American Society of Mechanical Engineers (ASME), 2008)Erosive wear damage of elbows due to solid particle impact has been recognized as a significant problem in several fluid handling industries. Solid particle erosion is a complex phenomenon due ... -
Coupling of Lattice Boltzmann and Finite Element Methods for Fluid-Structure Interaction Application
(The American Society of Mechanical Engineers (ASME), 2008)In order to analyze the fluid-structure interaction between a flow and a flexible structure, an algorithm was presented to couple the lattice Boltzmann method (LBM) and the finite element method ... -
A New Technique for Intergranular Crack Formation in Alloy 600 Steam Generator Tubing
(The American Society of Mechanical Engineers (ASME), 2008)For the integrity management of steam generator (SG) tubes, nondestructive evaluation performed using eddy current test (ECT) is necessary in the assessment. The reliability of ECT evaluation is ...