Journal of Electrochemical Energy Conversion and Storage: Recent submissions
Now showing items 301-320 of 533
-
Tuning the Photocatalytic Performance of Tungsten Oxide by Incorporating Cu3V2O8 Nanoparticles for H2 Evolution Under Visible Light Irradiation
(The American Society of Mechanical Engineers (ASME), 2020)The green energy production through water splitting under visible light irradiation has become an emerging challenge in the 21st century. Photocatalysis, being a cost-competitive and efficient technique, has grabbed much ... -
Ternary Alkali Carbonates Effect on Electrochemical Characterization of Nanocomposite Calcium-Doped Ceria Electrolytes (LNK-CDC) for SOFC
(The American Society of Mechanical Engineers (ASME), 2020)The entire world is facing a great shortfall in the energy supply due to the high consumption rate of fossil fuel-based energy resources. Solid oxide fuel cells (SOFCs) are the best alternative energy devices, which convert ... -
Nanorods of Bi–Co–S for Electrocatalysis of Glucose Oxidation and Hydrogen Evolution
(The American Society of Mechanical Engineers (ASME), 2020)In order to develop a non-precious metal-based catalyst, Bi–Co–S nanorods were prepared by a simple solvothermal method. The morphology and composition were characterized by scanning electron microscope (SEM), transmission ... -
The Extraction of Double-Layer Capacitance: In a Case of PANI Film
(The American Society of Mechanical Engineers (ASME), 2020)The extraction of double-layer capacitance (DLC) is proposed using the electrochemical impedance spectroscopy (EIS) technique. By the concept of the frequency-dependent DLC, the DLC of polyaniline (PANI)-coated platinum ... -
Battery Thermal Management Using Phase Change Material-Metal Foam Composite Materials at Various Environmental Temperatures
(The American Society of Mechanical Engineers (ASME), 2020)This investigation into phase change material (PCM)-based passive thermal management systems was conducted via an experimental approach using 19.5 A h lithium iron phosphate cells with dimensions of (7.25 × 160 × 227) mm3. ... -
Battery Thermal Management System Design: Role of Influence of Nanofluids, Flow Directions, and Channels
(The American Society of Mechanical Engineers (ASME), 2020)Lithium-ion batteries are currently being produced and used in large quantities in the automobile sector as a clean alternative to fossil fuels. The thermal behavior of the battery pack is a very important criterion, which ... -
A Thermal Design and Experimental Investigation for the Fast Charging Process of a Lithium-Ion Battery Module With Liquid Cooling
(The American Society of Mechanical Engineers (ASME), 2020)The appropriate temperature distribution is indispensable to lithium-ion battery module, especially during the fast charging of the sudden braking process. Thermal properties of each battery cell are obtained from numerical ... -
Investigating the Influence of Different Coating Surface Densities of Electrodes on Electrochemical Performance of Lithium-Ion Batteries
(The American Society of Mechanical Engineers (ASME), 2020)The anode and cathode pieces are vital components of lithium-ion batteries. The coating surface density of active material is a significant parameter involved during the fabrication of electrodes and has considerable impact ... -
Effects of Nonuniform Temperature Distribution on Degradation of Lithium-Ion Batteries
(The American Society of Mechanical Engineers (ASME), 2020)The effects of nonuniform temperature distribution on the degradation of lithium-ion (Li-ion) batteries are investigated in this study. A Li-ion battery stack consisting of five 3 Ah pouch cells connected in parallel was ... -
Modeling of Thermal Propagation Based on Two Cylindrical Lithium-Ion Cells
(The American Society of Mechanical Engineers (ASME), 2020)In recent years, safety-related accidents caused by lithium-ion battery (LIB) failures have often been reported and highlighted in the news. Thermal runaway (TR), as one of the most critical failure modes, and subsequent ... -
Structure Optimization of Battery Module With a Parallel Multi-Channel Liquid Cooling Plate Based on Orthogonal Test
(The American Society of Mechanical Engineers (ASME), 2020)In order to keep the power battery work within an ideal temperature range for the electric vehicle, the liquid cooling plate with parallel multi-channels is designed, and a three-dimensional thermal model of battery module ... -
A Novel Approach for Enhancing Thermal Performance of Battery Modules Based on Finite Element Modeling and Predictive Modeling Mechanism
(The American Society of Mechanical Engineers (ASME), 2020)Electric vehicles (EVs) are estimated as the most sustainable solutions for future transportation requirements. However, there are various problems related to the battery pack module and one such problem is invariable ... -
Experimental Study of a Thermal Cooling Technique for Cylindrical Batteries
(The American Society of Mechanical Engineers (ASME), 2020)Lithium-ion (Li-ion) batteries have been considered the most promising power source for road transportation. However, the performance and lifespan of Li-ion batteries are strongly dependent on the working temperature. The ... -
Multi-Layer Graphene/SnO2 Nanocomposites as Negative Electrode Materials for Lithium-Ion Batteries
(The American Society of Mechanical Engineers (ASME), 2020)We report the synthesis of SnO2/multi-layer graphene nanocomposites by an easy low temperature (60 °C) electroless plating route. An aqueous suspension containing Sn(BF4)2 with multi-layer graphene is reacted at 60 °C in ... -
Research on Proton Exchange Membranes for Improving Valve Regulated Sealed Lead-Acid Battery Cycling Performance
(The American Society of Mechanical Engineers (ASME), 2020)In this article, proton exchange membranes (PEMs) are used as separators for lead-acid batteries. Ion migration experiments are conducted to prove the efficacy of PEMs in blocking the passage of antimony ions. The cells ... -
Dual Roles of MoO3 Thin Film in Improving the Performance of Copper Bismuth Oxide Photocathode for Solar Water Splitting
(The American Society of Mechanical Engineers (ASME), 2020)Promoting the hole extraction from the photocathode semiconductor is crucial to not only enhance the charge separation and suppress the charge recombination but also to protect the oxidation of the photocathode semiconductor ... -
Special Issue on Heat Transfer and Thermal Management in Li-Ion Cells and Battery Packs
(The American Society of Mechanical Engineers (ASME), 2020)Thermal transport plays a critical role in ensuring performance and safety of electrochemical energy storage devices such as Li-ion cells. This is a multiscale challenge, ranging from the micro/nanoscale all the way to ... -
Comparing Physical and Electrochemical Properties of Different Weave Patterns for Carbon Cloth Electrodes in Redox Flow Batteries
(The American Society of Mechanical Engineers (ASME), 2020)Redox flow batteries (RFBs) are an emerging electrochemical technology suitable for energy-intensive grid storage, but further cost reductions are needed for broad deployment. Overcoming cell performance limitations through ... -
Controlling Porosity of Anode Support in Tubular Solid Oxide Fuel Cells by Freeze Casting
(The American Society of Mechanical Engineers (ASME), 2020)Precise porosity control is highly desirable for improving the electrochemical performance of solid oxide fuel cells (SOFCs). Freeze casting is an established method for enabling high bulk porosity in structures and ... -
Hybrid Nanostructured Ni(OH)2/NiO for High-Capacity Lithium-Ion Battery Anodes
(The American Society of Mechanical Engineers (ASME), 2020)A straightforward hydrothermal process followed by a controlled calcination technique is proposed for the synthesis of a Ni(OH)2 modified NiO nanohybrid structure. Conversion materials such as Li-ion battery anodes, NiO ...