Journal of Electrochemical Energy Conversion and Storage: Recent submissions
Now showing items 241-260 of 533
-
Real-Time State of Charge Estimation of the Extended Kalman Filter and Unscented Kalman Filter Algorithms Under Different Working Conditions
(The American Society of Mechanical Engineers (ASME), 2021)In the battery management system (BMS), the state of charge (SOC) is a very influential factor, which can prevent overcharge and over-discharge of the lithium-ion battery (LIB). This paper proposed a battery modeling and ... -
Experimental Study on Influence of Temperature and C-Rate of Discharge on Performance of In-House-Fabricated 30-Ah Li-Ion Prismatic Cell Made With Lithium Iron Phosphate and MCMB
(The American Society of Mechanical Engineers (ASME), 2021)An experimental study was carried out to quantify the influence of temperature and different C-rate of discharge on in-house fabricated lithium-ion (Li-ion) cell. A 30-Ah Li-ion cell is made of lithium iron phosphate (LFP) ... -
Remaining Useful Life Prediction of Lithium Battery Based on Sequential CNN–LSTM Method
(The American Society of Mechanical Engineers (ASME), 2021)Among various methods for remaining useful life (RUL) prediction of lithium batteries, the data-driven approach shows the most attractive character for non-linear relation learning and accurate prediction. However, the ... -
Creep and Anisotropy of Free-Standing Lithium Metal Foils in an Industrial Dry Room
(The American Society of Mechanical Engineers (ASME), 2021)Commercialization of energy-dense lithium metal batteries relies on stable and uniform plating and stripping on the lithium metal anode. In electrochemical-mechanical modeling of solid-state batteries, there is a lack of ... -
Cycling-Induced Microstructural Changes in Alloy Anodes for Lithium-Ion Batteries
(The American Society of Mechanical Engineers (ASME), 2021)High-capacity electrochemical alloying materials, such as tin and tin-based alloys, present an opportunity for the advancement of lithium-ion batteries. However, the destructive effects of volumetric expansion must be ... -
Robust Passivity-Based Control Scheme for 1.26 KW Proton Exchange Membrane Fuel Cell Under Temperature and Load Variations
(The American Society of Mechanical Engineers (ASME), 2021)The model-based system engineering (MBSE) is based on simplified mathematical models that reflect the dynamic behavior of the systems. These are most of the time nonlinear and need control schemes taking in consideration ... -
Overdischarge Detection and Prevention With Temperature Monitoring of Li-Ion Batteries and Linear Regression-Based Machine Learning
(The American Society of Mechanical Engineers (ASME), 2021)This work focuses on the use of linear regression analysis-based machine learning for the prediction of the end of discharge of a prismatic Li-ion cell. The cell temperature was recorded during the cycling of Li-ion cells ... -
A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst
(The American Society of Mechanical Engineers (ASME), 2021)This study has developed a two-dimensional, two-phase transport model to investigate the transport characteristics in direct methanol fuel cells (DMFCs) using platinum group metal (PGM)-free cathode catalysts. The model ... -
Ab Initio Investigation of the Elastic Properties of CaxSn1−x Alloys for Use As Battery Anodes
(The American Society of Mechanical Engineers (ASME), 2021)Density functional theory has been used to investigate 19 CaxSn1−x structures (six bulk materials and 13 alloys) as potential battery anodes. Of the alloys, we have found four stable phases (x = 0.25, 0.5, 0.625, and 0.75) ... -
Multi-Objective Optimization of Structural Parameters of Air-Cooled System for Lithium Battery Pack Based on Surrogate Model
(The American Society of Mechanical Engineers (ASME), 2021)The new energy electric vehicle, which takes clean electric energy as the main driving force, has no pollutants and exhaust emissions during its operation and has a higher energy utilization ratio than the fuel locomotive. ... -
Special Section on Mechanics of Electrochemical Energy Storage and Conversion
(The American Society of Mechanical Engineers (ASME), 2021)The increasing population growth, depletion of natural resources, and rising energy demand have sparked enormous research endeavors in electrochemical energy storage and conversion. For example, rechargeable lithium-ion ... -
Impact on Anode Performance of Lithium-Ion Batteries by Deep Cryogenic Treated SnSb/C Nanofiber Derived From Inorganic Precursors
(The American Society of Mechanical Engineers (ASME), 2021)The major obstacle prohibiting the practical application of Sn-based anodes is drastic volume variation during cycling processes. Here, polyacrylonitrile (PAN) was acted as a carbon source, and stannic chloride pentahydrate ... -
Human-Knowledge-Augmented Gaussian Process Regression for State-of-Health Prediction of Lithium-Ion Batteries With Charging Curves
(The American Society of Mechanical Engineers (ASME), 2021)Lithium-ion batteries have been widely used in renewable energy storage and electric vehicles, and state-of-health (SoH) prediction is critical for battery safety and reliability. Following the standard SoH prediction ... -
Direct Re-Usability of Lead-Plated Tin Bronze as Negative Plate for Lightweight Lead-Acid Battery
(The American Society of Mechanical Engineers (ASME), 2021)Lead-plated tin-bronze mesh was adopted as the negative grid to assembly 2V-DZM-20Ah lead-acid battery. Compared with the conventional negative plate, the weight of each tin-bronze plate was reduced by about 17 g, the ... -
Mini-Channel Liquid Cooling System for Improving Heat Transfer Capacity and Thermal Uniformity in Battery Packs for Electric Vehicles
(The American Society of Mechanical Engineers (ASME), 2021)Temperature is a significant factor affecting performance and safety of energy storage systems such as battery packs. How to design a reliable battery thermal management system (BTMS) is still a hot issue at present. Most ... -
A Computational Fluid Dynamics Coupled Multi-Objective Optimization Framework for Thermal System Design for Li-Ion Batteries With Metal Separators
(The American Society of Mechanical Engineers (ASME), 2021)Battery thermal management system (BTMS) has significant impacts on the performance of electric vehicles (EVs). In this research, a computational fluid dynamics (CFD) coupled multi-objective optimization framework is ... -
Special Section on Degradation Prediction and Recycling of Renewable Energy and Energy Storage Systems: Scenarios of 2020–2025
(The American Society of Mechanical Engineers (ASME), 2021)Given the degrading environment, countries across the globe have strongly emphasized the development and deployment of renewable energy and energy storage systems across various sectors such as residential, commercial, ... -
Erratum: “Effects of Nonuniform Temperature Distribution on Degradation of Lithium-Ion Batteries” [ASME J. Electrochem. Energy. Conv. Stor., 2020, 17(2), p. 021101; DOI: 10.1115/1.4045205]
(The American Society of Mechanical Engineers (ASME), 2021)An error occurs in Fig. 3(b) of the originally published paper on page 021101-3. The error does not influence the overall results or conclusions from the work. The corrected Fig. 3(b) is below: -
Three-Dimensional Glucose/Oxygen Biofuel Cells Based on Enzymes Embedded in Tetrabutylammonium Modified Nafion
(The American Society of Mechanical Engineers (ASME), 2021)A stable three-dimensional glucose/oxygen enzymatic biofuel cell is fabricated based on the method of polymer encapsulation-based immobilization. And three-dimensional carbon felt is used as the substrate of the bio-electrode ... -
Electrochemical Performance of Carbon Nanofibers/Cobalt Ferrite (CNF/CoFe2O4) Composites Synthesized by Two Approaches
(The American Society of Mechanical Engineers (ASME), 2021)In this paper, we report the fabrication of activated carbon nanofibers/cobalt ferrite (CNF/CoFe2O4) composites by electrospinning and hydrothermal methods for comparative study of electrochemical properties. The structural, ...