Journal of Materials in Civil Engineering: Recent submissions
Now showing items 981-1000 of 7936
-
Implementing a Slow-Cooling Method for Thermal Treatment of RHA to Use as a Secondary Precursor in Alkali-Activated Mortar
(American Society of Civil Engineers, 2025)Alkali-activated binder (AAB), a contemporary construction technology, aims at decelerating the cement demand. The lowered rate of cement demand will reduce the pace of cement production and also bring down the associated ... -
Impact Splitting Tensile Properties of Fly Ash–Recycled Aggregate Concrete
(American Society of Civil Engineers, 2024)This paper aims to study the impact splitting tensile properties of fly ash–recycled aggregate concrete (FARAC). The splitting tensile tests of FARAC with different replacement rates of recycled aggregate (0%, 30%, 50%, ... -
Impact of Binder and Aggregate Type on the Cracking, Rutting, and Moisture Susceptibility of Asphalt Mixes in Oklahoma: A BMD Approach
(American Society of Civil Engineers, 2025)Several transportation agencies have moved toward the study and implementation of balanced mix design (BMD) in asphalt mixes. BMD is based on optimizing the mixture’s mechanical properties using performance-related tests ... -
Impact of Artificial Corrosion Technique under Variable Acceleration on Morphological Efficacy in Reinforced Concrete Elements
(American Society of Civil Engineers, 2025)The popularity of artificially accelerated methodologies for inducing corrosion in reinforced concrete (RC) elements has increased exponentially over recent decades due to their ability to achieve broad damage spectra ... -
Identification of Suitable Parameters for Quantitative Comparison of Bitumen with Similar Grades
(American Society of Civil Engineers, 2024)With India importing more than 35% of its bitumen demand, there is a significant variation in the cost of bitumen in the international market. There is a need to identify suitable parameters that can help in selecting the ... -
Hydration, Hardening Properties, and Microstructure of Magnesium Phosphate Cement–Emulsified Asphalt Composites across Various Stoichiometries
(American Society of Civil Engineers, 2024)To promote green and low-carbon development in the rehabilitation of damaged asphalt pavements, a cold patching material combining magnesium phosphate cement (MPC) with emulsified asphalt (EA) was developed. This study ... -
Gypsum Casting Plaster Reinforced with Graphene Oxide Nanofillers
(American Society of Civil Engineers, 2025)Casting plaster, mainly used in building construction for the manufacture of partition wall blocks, panelboards/drywalls, coatings, and casting molds, was reinforced with graphene oxide (GO) nanofillers. The composites ... -
Greener Concrete Paving Blocks with Hybrid Alkaline Cements and Recycled Aggregates
(American Society of Civil Engineers, 2025)The construction sector must deliver methods of construction targeting the valorization of waste that shows potential to play value-added roles. This is a key step to reduce the heavy environmental impacts caused by a ... -
Full-Scale Testing of Lateral Pressures in an Expansive Clay upon Infiltration
(American Society of Civil Engineers, 2025)Full-scale testing of lateral pressures in expansive clay under various saturation conditions is crucial to better understand the behavior of these soils and predict potential damage to structures. However, due to their ... -
Fresh Properties of Low-Carbon Cement Pastes Incorporating Industrial By-Products
(American Society of Civil Engineers, 2025)Cement production involves limestone decarbonation and fuel consumption, making it responsible for almost 10% of worldwide CO2 emissions that worsen the effects related to global warming. Consequently, finding alternative ... -
Freeze–Thaw Durability and Shrinkage of Calcium Sulfoaluminate Cement Concrete with Internal Curing
(American Society of Civil Engineers, 2024)Numerous applications in civil and transportation engineering require concrete with high early strength and good durability properties. Limited studies have revised the performance of high early-strength concrete prepared ... -
Freeze–Thaw Damage Mechanism and Performance of Coal Gangue Concrete
(American Society of Civil Engineers, 2025)To explore the frost damage characteristics of coal gangue and coal gangue concrete in cold regions, and to streamline the validation process of coal gangue applications in engineering fields, this paper conducted freeze–thaw ... -
FRCM–Masonry Joints at High Temperature: Residual Bond Capacity
(American Society of Civil Engineers, 2025)The paper describes the results of an experimental investigation into the bond behavior of fabric-reinforced cementitious matrix (FRCM)–masonry joints after exposure to high temperature. Single-lap direct shear tests (DS) ... -
Fracture Properties of Full-Graded Dam Concrete under Discontinuous Cyclic Loading Based on Acoustic Emission
(American Society of Civil Engineers, 2025)Concrete dams are often subjected to complex loading conditions throughout their operational lifespan. This study investigates the fracture behavior of full-graded dam concrete (FGDC) under the combined action of cyclic ... -
Formulation of Biological Cold Patching Agent in the Application of Cold Patching Asphalt Mixture
(American Society of Civil Engineers, 2025)Bio-based cold patching asphalt mixture shows promising properties in pothole reparation and provides an environmentally friendly alternative to traditional paving materials. However, in-depth studies and the reliable ... -
Fly Ash Concrete Specimens Admixed with Nanoparticles and Their Interaction with Seawater
(American Society of Civil Engineers, 2024)This study is on fly ash (FA) concrete admixed with TiO2 nanoparticles (FAT), CaCO3 nanoparticles (FAC), and an equal ratio of TiO2 and CaCO3 nanoparticles (FATC) were exposed to seawater for 365 days in order to find the ... -
Flexural Fatigue Performance of Pavement-Grade Low-Carbon Concrete Containing Waste Clay Bricks
(American Society of Civil Engineers, 2024)This study investigated the flexural fatigue performance of pavement-grade geopolymer concrete (GPC) developed using low-carbon binders containing waste clay bricks (WCB), slag, and fly ash. Concrete was developed using ... -
Flexural Fatigue Performance of Hemp Fiber–Reinforced Concrete Using Recycled Concrete Aggregates as a Sustainable Rigid Pavement
(American Society of Civil Engineers, 2024)This research delved into the mechanical and fatigue attributes of hemp fiber–reinforced concrete (HFRC) using both natural crushed aggregates (NCA) and recycled concrete aggregates (RCA) for sustainable rigid pavements. ... -
Flexural Characteristics of Tailings Cemented with Fiber-Reinforced Green Composite Cementitious Matrix
(American Society of Civil Engineers, 2024)Backfilling mine goafs can significantly advance the mining industry; however, few researchers have used geopolymers reinforced with polypropylene fibers as filling materials. In this study, the flexural properties of ... -
Factors Affecting the Release Behavior and Sustained Repair Effect of Self-Healing Microcapsules Encapsulating Rejuvenators in Asphalt Mastic
(American Society of Civil Engineers, 2025)Microcapsule technology is a promising approach for enhancing the self-healing ability of asphalt pavements. In this study, the self-healing behavior of melamine-urea-formaldehyde (MUF) microcapsules was investigated. The ...