Journal of Materials in Civil Engineering: Recent submissions
Now showing items 2741-2760 of 7936
-
Evaluation of the Effect of Different Compaction Methods on Porous Concrete Pavements: Correlation with Strength and Permeability
(ASCE, 8/1/2021)The main purpose of this article is to evaluate the correlation between the indirect tensile strength and the permeability capacity of porous concrete (PC) pavements. The compaction method employed plays a critical role ... -
Effect of Drying on Clay Clogging of Pervious Concrete
(ASCE, 7/1/2021)Pervious concrete, extensively applied in sustainable urban drainage systems, is prone to clogging. From the perspective of the clogging particle size relative to the pore size, clay particles easily pass through pervious ... -
Innovative Gypsum–Particle Composite Used as Building Structural Panels
(ASCE, 8/1/2021)An innovative preparation method was invented that adds adhesive to gypsum–particle composites. The effects of varying the wood particle to gypsum ratio and melamine-urea-formaldehyde adhesive (MUF) content on mechanical ... -
Effect of Silane Coupling Agent on Improving Adhesive Property between Acidic Aggregate and Hydraulic Asphalt
(ASCE, 7/1/2021)Silane coupling agents (SCAs) are a type of antistripping agent for improving the adhesive property between acidic aggregate and hydraulic asphalt. To evaluate the modified effect, find the optimal dosage of SCA, and study ... -
Size Effects on the Mechanical Properties of 3D Printed Plaster and PLA Parts
(ASCE, 7/1/2021)It is common to perform small-scale prototyping before large-scale application of three-dimensional (3D) printing technology and in this case size effects can have an important effect. There has been limited study to date ... -
Rolling Shear Properties of Hybrid Cross-Laminated Timber
(ASCE, 7/1/2021)Cross-laminated timber (CLT) is an innovative wood product that can be used to build midrise and tall wood construction as an alternative to concrete, masonry, and steel. As floor, roof, and wall made of CLT is subjected ... -
Use of Limited Experimental Data for the Prediction of Creep and Recovery of Asphalt Binders
(ASCE, 7/1/2021)Prediction of creep and recovery of asphalt binders using limited experimental data can reduce instrumental stress and save time. A simple methodology, using generalized Burger’s model (GBM) and time temperature superposition ... -
Experimental Study of the Heating Potential of Mortar-Aggregate under Microwave Irradiation
(ASCE, 7/1/2021)Microwave heating is a novel and promising method to remove mortar that adheres to aggregates in recycled concrete. A systematic experiment was carried out to evaluate the heating results of mortar-aggregate composite ... -
Tensile- and Shear-Strength Tests with Adhesive Connections in Dynamic Message Signs
(ASCE, 6/1/2021)A dynamic message sign (DMS) is made up of a display, cabinet sheet aluminum skin, and internal structure along with electrical components. The aluminum skin is connected to the internal structure usually with a welded ... -
Slag-Based Geopolymer Concrete as Reinforced Concrete Jacketing Agent
(ASCE, 7/1/2021)The acceptance of geopolymeric systems in construction industry as an alternative to portland cement has paved the way for using it in the strengthening of reinforced concrete structures. In this regard, a study was carried ... -
Experimental Investigation of the Residual Physical and Mechanical Properties of Foamed Concrete Exposed to High Temperatures
(ASCE, 7/1/2021)Foamed concrete has been widely used in building energy conservation and insulation engineering, and its fire resistance is very important for buildings under fire. However, due to high porosity and permeability, the ... -
Numerical Simulation of Corrosion-Induced Cracking of Concrete Considering Rust Penetration into Cracks
(ASCE, 8/1/2021)Evaluation of the concrete cracking induced by rebar corrosion is necessary for accurately clarifying the durability and predicting the service life of reinforced concrete (RC) structures. The fact that rust penetration ... -
Evaluation of Aging Characteristics of High-Viscosity Asphalt: Rheological Properties, Rutting Resistance, Temperature Sensitivity, Homogeneity, and Chemical Composition
(ASCE, 7/1/2021)The purpose of this paper was to study the aging behaviors of high-viscosity asphalt (HVA). Three kinds of asphalt binders [base asphalt, styrene-butadiene-styrene-modified asphalt (SBSMA), and HVA] were treated with rolling ... -
Size Effect on the Compressive Strength of Laminated Bamboo Lumber
(ASCE, 7/1/2021)The size effect on the axial compressive performance of laminated bamboo lumber is studied through compression tests on three groups of short columns with different heights and section sizes. The failure modes, bearing ... -
Creep Mechanisms in Precracked Polypropylene and Steel Fiber–Reinforced Concrete
(ASCE, 8/1/2021)Recently, fiber-reinforced concrete (FRC) creep behavior has become a much addressed topic, and the main gap found in the literature is whether cracked FRC is stable in the serviceability limit state. Therefore, this work ... -
Methodology for Quantifying Features of Early-Age Concrete Cracking from Laser Scanned 3D Data
(ASCE, 7/1/2021)Quantifying the features of concrete cracking is of significance for assessing the bearing capacity and durability of concrete structures. However, there is a lack of efficient and reliable observation and description of ... -
Alkali-Activated Slag Concrete with Recycled Aggregate: Long-Term Performance
(ASCE, 7/1/2021)This paper evaluates the long-term mechanical properties (up to 1 year) of alkali-activated slag concrete produced with recycled coarse aggregate (AAS-RA) and natural coarse aggregate (AAS-NA). The AAS-RA achieved a ... -
Assessment of the Selection of Asphalt Binder for Full Cross-Section Asphalt Waterproof Layer in High-Speed Railway Ballastless Track
(ASCE, 8/1/2021)In China, the application of asphalt layers in high-speed railway ballastless tracks has two functions. Asphalt layers can be used as a support layer or a waterproof layer; one of these functions is chosen in general design. ... -
Mechanical Properties of Polyester-Coated Fabric Membrane Material Subjected to Uniaxial Loading at Elevated Temperatures
(ASCE, 7/1/2021)Polyester-coated fabric has been widely used in membrane structures. However, the mechanical properties of polyester-coated fabric at elevated temperatures have not been well studied, limiting its applications in the ... -
Investigating Aging and Rejuvenation Mechanism of Biomodified Rubberized Bitumen
(ASCE, 7/1/2021)This study examines the effects of five biomodifiers on the aging and rejuvenation of biomodified rubberized bitumen. It further discusses the challenges associated with restoration and reuse of aged bitumen, especially ...