Journal of Materials in Civil Engineering: Recent submissions
Now showing items 2501-2520 of 7936
-
Optimization of Concrete Mixtures Containing Lightweight Expanded Clay Aggregates Based on Mechanical, Economical, Fire-Resistance, and Environmental Considerations
(ASCE, 2021-11-25)This paper aims to develop an optimal design mixture for concrete containing lightweight expanded clay aggregates (LECA) and silica fume with a holistic view in which the mechanical properties, strength retention at elevated ... -
Laboratory Evaluation of Microsurfacing Bond Strength
(ASCE, 2021-11-25)This paper summarizes the results of a study that was conducted to evaluate the influence of different factors on the bond strength between a microsurfacing layer and an existing pavement structure. The considered factors ... -
Prediction of (Steel-Glass) Fiber/Concrete Interfacial Friction Properties in FRC Composites Using Calibration Method and Evaluation of Fiber Diameter Role
(ASCE, 2021-11-24)This paper presents a series of single fiber pull-out tests on steel and glass fiber embedded in a cementitious matrix. First, the phase of fiber sliding in the concrete matrix was defined using a shear lag model; then, ... -
Effect of Cement and Fly Ash Dosages on the Characteristics and Performance of Microsurfacing Mix
(ASCE, 2021-11-25)In this study, the role of mineral fillers on the microsurfacing mix characteristics and performance was assessed for 10 different combinations of mineral filler type (cement and fly ash) and dosages (0%–3%). The mixes ... -
Low-Alite Portland Cement in Steam-Curing Condition: Long-Term Compressive Strength and Permeability
(ASCE, 2021-11-24)Steam curing is a commonly used method to obtain cement products with high early strength. It is popularly employed to produce prefabricated units in factory. However, the long-term performance of steam-cured products is ... -
Basalt-Containing Pressed Cement Plates for Construction Systems: Technological and Toxicological Characterization
(ASCE, 2021-11-25)In recent years, industries have been demanded for better disposal methods of byproducts. In addition, civil construction in Brazil has been steadily growing, necessitating the development of new resources and the use of ... -
Dowel-Bearing Strength of Southern Pine Cross-Laminated Timber
(ASCE, 2021-11-24)The current method for estimating parallel-to-grain dowel bearing strength of cross-laminated timber (CLT) fasteners applied perpendicular to the face in the US adjusts the length of the fastener to account for the effect ... -
Preliminary Study of the Mechanical Behavior of Gypsum Plastering Mortars with Ceramic Waste Additions
(ASCE, 2021-12-28)In recent years, the construction sector has generated large amounts of construction and demolition waste (CDW). In Europe, more than 50% of this waste is ceramic waste (CW). Therefore, and in accordance with the Circular ... -
Experimental Study on Properties of Magnesium Phosphate Cement–Based Self-Compacting Concrete with High-Early Strength
(ASCE, 2021-11-24)Recently, magnesium phosphate cement (MPC) has received extensive research attention due to its fast construction, excellent bonding performance, and eco-friendly environment. Thus, some scholars believe that MPC is a ... -
Test of Dynamic Mechanical Properties of Ambient-Cured Geopolymer Concrete Using Split Hopkinson Pressure Bar
(ASCE, 2021-11-25)The application of geopolymer concrete (GPC) in construction could reduce a large amount of carbon dioxide (CO2) emission, which is greatly beneficial to environmental sustainability. Structures made of GPC might be subjected ... -
Investigation of Bagasse Ash as an Alternative Raw Material in Clinker Production
(ASCE, 2021-11-23)The feasibility of using sugarcane bagasse ash waste (BA) as an alternative raw material for clinker production was investigated. The effect of the BA on the mineral and mechanical properties of clinker at various sintering ... -
Mechanical Properties of Douglas Fir Wood at Elevated Temperatures under Nitrogen Conditions
(ASCE, 2021-11-23)The mechanical properties of wood tend to decrease with increasing temperature under normal atmospheric conditions. A pyrolysis zone develops inside wood when it catches fire, and the surface is charred; it is important ... -
Fluvial Sediments as SCMs: Characterization, Pozzolanic Performance, and Optimization of Equivalent Binder
(ASCE, 2021-11-22)This paper presents an assessment of recycling of thermally treated fluvial sediments as a supplementary cementitious material (SCM). Different calcination treatments were conducted with temperatures ranging between 450°C ... -
Effect of Molar Ratios and Curing Conditions on the Moisture Resistance of Magnesium Oxychloride Cement
(ASCE, 2021-11-19)Magnesium oxychloride cement (MOC) is a promising binder with many advantageous properties over traditional binders. Its main downfall, restricting large-scale use, is its inherent susceptibility to moisture. However, in ... -
Influence of Rubber Inclusion on the Dynamic Response of Rail Track
(ASCE, 2021-11-22)Heavier and faster trains have motivated researchers to seek better ways to absorb the increasing amount of energy imparted to rail foundations and mitigate track deterioration. In recent years, resilient rubber products ... -
Effect of Biopolymeric Stabilization on the Strength and Compressibility Characteristics of Cohesive Soil
(ASCE, 2021-11-22)Sustainable engineering discourages the use of conventional soil stabilizers such as lime and cement owing to their higher carbon emission rates. To address these challenges, many researchers considered biopolymer ... -
Comparing Short-Term Performance of Corrugated HDPE Pipe Made with or without Recycled Resins for Transportation Infrastructure Applications
(ASCE, 2021-11-22)In recent years, corrugated high-density polyethylene (HDPE) pipes manufactured from recycled resins have been on the rise for infrastructure sectors as a result of their numerous advantages. Compared to HDPE pipes made ... -
Binding Mechanism of CSA Cement on Premixed Cl− and Its Governing Parameters
(ASCE, 2021-11-22)Calcium sulfoaluminate (CSA) cement showed a good binding capacity on the external Cl− transported into concretes from its surrounding environment. However, it is unclear whether the same binding mechanism can still apply ... -
Investigation of Drying Shrinkage of Cement-Based Materials Assisted by Digital Image Correlation
(ASCE, 2021-12-23)This paper presents a validation of a new protocol for the characterization of drying shrinkage of cement paste. The method consists of using environmental scanning electronic microscope (ESEM) or climatic chamber (CC) ... -
Numerical and Experimental Analysis of Lateral Resistance of Single Y-Shaped Steel Sleeper on Ballasted Tracks
(ASCE, 2021-10-29)Lateral track stability is a critical parameter in ballasted railway tracks considering track buckling. The sleeper type has a direct impact on lateral track stability. Due to the Y-shape sleeper tracks’ truss structure, ...