Journal of Materials in Civil Engineering: Recent submissions
Now showing items 2281-2300 of 7936
-
Flexural Performance of Nanomodified Cementitious Composites Reinforced with BFP in Bonded Overlays
(ASCE, 2022/05/23)There is strong demand for ductile cement-based materials in various rehabilitation systems of concrete infrastructure. This study investigated the flexural performance of nanomodified cementitious composites incorporating ... -
Investigation on the Effect of Ethylene Bis(Stearamide) and Polyphosphoric Acid Modification of Bitumen for Paving Applications
(ASCE, 2022/05/20)In this study, the mutual effect of polyphosphoric acid (PPA) and ethylene bis(stearamide) (EBS) modification was examined on the high and low service temperatures and viscosity of a performance grade (PG) 58-22 asphalt ... -
Relationship of Adhesion Performance between Asphalt Binder Using Solvent Elution Method and Crushed Pebbles Asphalt Mixture
(ASCE, 2022/05/20)Abundant crushed pebbles are used as substitutes for high-quality aggregate to solve the shortage of asphalt pavement aggregate in Tibet. However, since crushed pebbles belong to acid aggregates with a smooth surface, the ... -
Modeling the Viscosity Behavior of Crumb Rubber–Modified Binder Using Response Surface Methodology
(ASCE, 2022/05/23)Crumb rubber is one of the waste materials used to improve the behavior of binders. The use of this recycled rubber as a common cheap additive can also help in preserving the environment. Modifying the binder with this ... -
Preparation, Characterization, and Anti-Icing Properties of Sustained-Release Low-Freezing-Point Asphalt Mixture
(ASCE, 2022/05/24)Pavements covered with snow and ice in winter will reduce antiskid performance, which may cause harm to road operation safety. In this study, an asphalt mixture containing a low-freezing-point additive (LFPA) was developed ... -
Influence of Same-Grade Asphalt Binder from Different Sources and Aging on Moisture Damage Characteristics of Asphalt–Aggregate System
(ASCE, 2022/05/24)India is witnessing unprecedented growth in its road network. To meet the asphalt binder demand, distillation towers have been loaded with crude oil from different sources. Although the quality system is expected to guarantee ... -
Textile Reinforced Concrete Subjected to Acidic and Alkaline Environment: Experimental Study
(ASCE, 2022/05/18)Textile-reinforced concrete (TRC) is a special type of concrete gaining popularity nowadays in the field of civil engineering due to its technical advantages. Owing to the absence of coarse aggregate and high paste content, ... -
Evaluation of Rejuvenated Aged-Asphalt Binder by Waste-Cooking Oil with Secondary Aging Considered
(ASCE, 2022/05/18)Waste-cooking oil (WCO) has received significant attention regarding rejuvenating aged-asphalt binder (AB) in recent years. Most current studies focused on whether the performance of WCO rejuvenated aged-asphalt binder ... -
Preparation of High-Luminescent Materials and Application of Luminescent Coatings in Road Engineering
(ASCE, 2022/05/18)With the development of the highway industry and new materials, long-afterglow luminescent material as a new energy storage and environmental protection material has gradually been applied to night lighting. In this study, ... -
Mechanical Behaviors of Metakaolin-Based Engineered Geopolymer Composite under Ambient Curing Condition
(ASCE, 2022/04/28)Geopolymers have been long recognized as the next-generation building material due to environmental reasons. However, geopolymers are inherently brittle and usually require high-temperature curing. This paper was intended ... -
Rheological Characterization of Cementitious Suspensions with Limestone Calcined Clay for Pumping Applications
(ASCE, 2022/05/18)Pumping of concrete is an efficient placement technique. When the concrete is pumped in a pipe, the lubrication layer (LL) forms and its rheological properties predominantly dictate the flow and govern the resumption ... -
Microwave Fast Sintering Production of Sustainable Lightweight Aggregates with Agroindustrial Waste
(ASCE, 2022/05/17)This study aims at analyzing the influence of agroindustrial waste incorporation into red ceramics to produce lightweight aggregates sintered in a microwave oven. Sustainable artificial lightweight aggregates are sought ... -
Evaluation of Properties and Performance Improvement Mechanism of Novel Waterborne Epoxy Modified Asphalt Emulsion with Styrene–Butadiene–Chloroprene Rubber
(ASCE, 2022/05/28)This study aims to investigate the properties of novel waterborne epoxy modified asphalt emulsion with styrene–butadiene–chloroprene rubber (SBR/CR) and evaluate its performance improvement mechanism. To achieve this ... -
Compounding Scheme Optimization of Composite Flame Retardant and Its Synergistic Inhibitory Effects on Bituminous Combustion
(ASCE, 2022/04/26)To inhibit the multiphase combustion characteristics of polymer-modified bitumen (PMB) at high temperatures, a new composite flame retardant with synergistic effects was developed based on the gradient distribution of ... -
Three-Dimensional Failure Criterion of Asphalt Mixtures in Asphalt Pavement
(ASCE, 2022/04/26)Material resistance and performance are determined by the failure criterion for an asphalt mixture, affecting the scientific design of pavement. Conventional tensile, compression, bending, and split tests for asphalt mixture ... -
Experiment and Probabilistic Prediction on Mechanical Properties of Corroded Prestressed Strands under Different Strain Levels
(ASCE, 2022/05/20)At present, prestressed structures are widely used in offshore buildings and bridges. After corrosion, the prestressed structure’s mechanical properties decline, significantly reducing the structure’s bearing capacity and ... -
Shear Capacity of Ultrahigh-Performance Concrete with Monolithic Interface and Wet-Joint Interface
(ASCE, 2022/04/28)A total of 65 Z-shaped ultrahigh-performance concrete (UHPC) specimens with monolithic interfaces, flat-wet-joint interfaces (roughened with a high-pressure water jet), and keyed-wet-joint interfaces were tested under the ... -
Effects of Adsorption Group and Molecular Weight of Viscosity-Modifying Admixtures on the Properties of Cement Paste
(ASCE, 2022/04/26)To explore the potential application of high-performance viscosity-modifying admixtures (VMAs) is of great importance. In this work, the effects of the adsorption group and molecular weight of VMAs on the properties of ... -
Experimental Study on Effect of Temperature on Direct Tensile Behavior of Hydraulic Asphalt Concrete at Different Strain Rates
(ASCE, 2022/04/25)The tensile mechanical properties of hydraulic asphalt concrete (HAC) play a significantly important role in the safety of the impervious core in embankment dams. This paper aims to develop a direct tensile test setup with ... -
Production of a New Base Material for Load-Bearing Water-Storing Road
(ASCE, 2022/04/25)In this work, a porous road base material was studied for a load-bearing water-storing road. According to the performance analysis, asphalt and ordinary portland cement did not work well on the load-bearing water-storing ...