Journal of Materials in Civil Engineering: Recent submissions
Now showing items 1661-1680 of 7936
-
Corrosion Behavior of Coupled Steel Bars under Different Stress Levels in Simulated Concrete Pore Solutions
(ASCE, 2024/04/01)To study the corrosion behavior of coupled steel bars under applied stresses, experiments on the influence of applied tensile and compressive stresses on the corrosion of coupled steel bars in simulated concrete pore ... -
Innovative Treatment of Crack Defects and Skid Resistant Deficiencies in Old Asphalt Pavement Using a Prefabricated Flexible Ultrathin Overlay
(ASCE, 2024/05/01)This study aims to develop a prefabricated flexible ultrathin overlay that can quickly and effectively repair cracks, particularly reticulation cracks, in old asphalt pavements while improving skid resistance. The overlay ... -
Effect of Protein Containing Hydrogels on the Self-Healing of Cementitious Materials
(ASCE, 2024/05/01)This study examined the effect of hydrogels containing urease and proteins on the self-healing of cracked cementitious materials. The encapsulation of proteins and urease decreased the absorption of hydrogels. It was shown ... -
Experimental Investigation on Mechanical Properties and Ions Transmission Law of Concrete under Capillary Action in Water Level Fluctuating Environment
(ASCE, 2024/02/01)Concrete structures partially immersed in seawater will be subjected to severe chloride and sulfate erosion under the capillary and diffusion actions. Nevertheless, the present studies only discuss the capillary action in ... -
Experimental Investigation on the Performance of Cement Mortar by Partial Replacement of the Standard Sands with Sulfide-Contained Iron Tailings
(ASCE, 2024/06/01)The usage of iron tailings as construction aggregates is a potential route to save the cost of standard sands and protect the environment of mining area. This study mainly investigates the performance of cement mortars by ... -
Dynamic Mechanical Properties and Mechanisms of Ordinary Concrete after High Temperature
(ASCE, 2024/03/01)Concrete structures are at risk of fire and explosion effects during service. This paper mainly conducted static and dynamic mechanical test research of concrete after high temperature. Five different target temperatures ... -
Mechanistic Performance and Distress Model of Bottom Ash Modified Porous Asphalt Concretes with Various Thailand Aggregates
(ASCE, 2024/05/01)The porous structure in the porous asphalt concrete (PAC) mixture is achieved by incorporating a substantial amount of coarse aggregate and polymer-modified asphalt binder (PMA). Bottom ash (BA) was used to modify the ... -
Effect of Foaming Agent on Physical and Mechanical Properties of Foamed Phosphogypsum
(ASCE, 2024/03/01)Foamed phosphogypsum (FPG) has recently attracted extensive interest owing to its potential consumption of phosphogypsum and its substitution for traditional gypsum building materials. However, as an important component ... -
Self-Regulating the Temperature of Permeable Concrete Based on Phase Change Materials
(ASCE, 2024/06/01)Phase change microcapsules are a type of energy storage material that can affect temperature changes by changing its material state and releasing or absorbing latent heat. In this paper, the temperature effect of phase ... -
Performance of Cold-Mix Asphalt with Calcined Eggshell Powder–Activated GGBFS Filler
(ASCE, 2024/04/01)Cold-mix asphalt (CMA) can be produced more sustainably by using byproducts as fillers instead of conventional materials such as cement. This study used a new filler of calcined eggshell powder (cESP)-activated ground ... -
Study on Constitutive Model of Cyclic Elastoplastic Behavior of 6082-T6 Aluminum Alloy
(ASCE, 2024/05/01)This paper aims to propose an improved constitutive model based on the classical Chaboche mixed hardening model to describe the cyclic elastoplastic behavior of 6082-T6 aluminum alloy. First, 16 specimens from 6082-T6 ... -
Investigation of High Plasticity Clay Stabilized with Cement and Zeolite Using Time-Dependent Pressure Wave Velocity
(ASCE, 2024/06/01)Enhancing the dynamic properties of expansive soils using cementitious materials has attracted the attention of many researchers over the past few decades. Supplementary cementitious materials (SCMs) can be used as partial ... -
Nano- and Microscopic Investigation on the Strengthening Mechanism of ITZs Using Waste Glass Powder in Modeled Aggregate Concrete
(ASCE, 2024/04/01)As a pozzolan, waste glass powder (WGP) can improve the mechanical properties and durability of concrete, especially at a later age. However, the modification mechanisms should be fully understood and discussed. One of the ... -
Chloride Binding Capacity of Calcium Silicate Hydrates and Friedel’s Salt Influenced by Fly Ash, Slag, and Silica Fume
(ASCE, 2024/06/01)Chloride binding capacity is an important factor affecting the durability of concrete, which is directly related with the hydrates of paste. Therefore, this research investigated the chloride binding capacity of calcium ... -
Investigation on the Effect of Long-Term Aging on Low-Temperature Viscoelastic Behavior of Bitumen through Physicochemical Characterization
(ASCE, 2024/05/01)The long-term aging of bitumens and its effect on low-temperature performance is a detrimental phenomenon. In order to investigate the effects of the aging phenomenon on the low-temperature performance of bitumens, it is ... -
Film-Forming Property of Cement Paste with Red Mud as a Supplementary Cementitious Material
(ASCE, 2024/06/01)Red mud has been used as a supplement substitute material in the fabrication of concrete. However, the influence mechanism of red mud on the film-forming performance of cement paste is still unclear. In this study, red mud ... -
Utilization of Superhydrophobic Phosphogypsum in Mortar to Ameliorate Water Repellency and Mechanical Strength
(ASCE, 2024/04/01)Phosphogypsum (PG) is a byproduct of the phosphate fertilizer industry that can be used in cement mortar. However, PG mortar is known to have high water absorption. This paper proposes a new method to address this issue ... -
Properties of Alkali-Activated Concrete Made Using the Optimum Combinations of Precursor Materials and Activation Parameters
(ASCE, 2024/04/01)This paper presents the results of a study conducted to investigate the properties of alkali-activated concrete (AAC) mixtures prepared using the optimum combinations of four precursor materials (red mud, limestone powder, ... -
Macro–Micro Testing and Molecular Simulation on the Aging Mechanism and Behavior of SBS-Modified High Viscosity Asphalt
(ASCE, 2024/02/01)In this paper, the thermal oxygen aging test was conducted on the styrene-butadiene-styrene block copolymer (SBS) type high viscosity modifier (HVM), and the appearance, solubility, functional groups, and molecular weight ... -
Study on Flame Retardant Performance of Modified Asphalt Based on Functional Groups and Thermogravimetric Analysis
(ASCE, 2024/03/01)In order to clarify the flame retardant mechanism and microscopic performance of modified asphalt, a new inorganic flame retardant was prepared using three flame retardants, and antimony trioxide and decabromodiphenyl oxide ...