Journal of Aerospace Engineering: Recent submissions
Now showing items 941-960 of 2488
-
Wind Tunnel Tests on Wind Pressure Characteristics of Sawtooth Roofs
(American Society of Civil Engineers, 2018)Wind tunnel tests were conducted to investigate the wind pressure characteristics of sawtooth roofs in a simulated open country wind field with relatively low turbulence intensity. Models of monosloped and sawtooth roof ... -
Reduced-Order Modeling for Nonlinear Aeroelasticity with Varying Mach Numbers
(American Society of Civil Engineers, 2018)This paper proposes a nonlinear aerodynamic reduced-order model robust to different Mach numbers based on a recursive neural network. To model the nonlinear features with varying flow parameters, the Mach number is adopted ... -
Reentry Trajectory Design with Pigeon Inspired Optimization Using Derived Angle of Attack Profile
(American Society of Civil Engineers, 2018)This paper proposes two strategies that generate the entry trajectories using pigeon inspired optimization (PIO) for a lifting type reentry vehicle. The obtained entry trajectory should be within the entry corridor formed ... -
Arching Effect of Planetary Regolith Simulant under Extraterrestrial Gravities
(American Society of Civil Engineers, 2018)Attention has been devoted to the construction of off-earth base construction and mineral mining in recent years. This paper studies the influence of extraterrestrial gravities on the arching effect surrounding deeply ... -
Coupled Responses of Partially Liquid-Filled Container with Multielastic Annular Baffles under Lateral Excitations
(American Society of Civil Engineers, 2018)The coupled responses of partially liquid-filled containers equipped with multielastic baffles subjected to lateral excitations have been investigated. The liquid domain has been divided into some subdomains. The analytical ... -
Robust Flutter Suppression and Wind-Tunnel Tests of a Three-Dimensional Wing
(American Society of Civil Engineers, 2018)In this study, a novel reduced-order scheme is proposed to model the airspeed and the air density uncertainties of an aeroelastic system. Based on the present reduced-order scheme, the dimensions of uncertainties could be ... -
Novel Self-Centering Negative Stiffness Damper Based on Combination of Shape Memory Alloy and Prepressed Springs
(American Society of Civil Engineers, 2018)This paper proposes a novel self-centering negative stiffness damper (SCNSD), which combines superelastic shape memory alloy (SMA) and prepressed springs in parallel for damping enhancement. A mechanical model of the damping ... -
UAV Broken-Line Path Following under Disturbance Conditions
(American Society of Civil Engineers, 2018)For the broken-line path following problem of unmanned aerial vehicles (UAVs), to enhance the ability to reject wind disturbance and reduce position error overshoot when a UAV turns in the switching position of a broken-line ... -
Dynamic Response Analysis of a Frame Structure with Superelastic Nitinol SMA Helical Spring Braces for Vibration Reduction
(American Society of Civil Engineers, 2018)This paper proposes a new type of energy dissipation brace system that is composed of superelastic Nitinol shape memory alloy (SMA) helical springs to reduce seismic responses of a frame structure. To investigate the ... -
Experimental Investigation of Asymmetric Vortex Breakdown Flow Control by Microperturbation over Highly Swept Wings
(American Society of Civil Engineers, 2018)An experimental investigation on asymmetric vortex breakdown flow over three delta wings with sweep angle of 85°, 8°, and 7° was carried out in a wind tunnel at high angles of attack and Reynolds number of 1.215×16 using ... -
General Framework for Modeling Multifunctional Metamaterial Beam Based on a Derived One-Dimensional Piezoelectric Composite Finite Element
(American Society of Civil Engineers, 2018)Phononic crystals and metamaterials have been widely investigated over the last decade. In recent years, by integration with piezoelectric transducers, phononic/metamaterial-based piezoelectric energy harvesters (PEHs) ... -
Effective Control of Composite Honeycomb Structures on the Tip Leakage Flow in Turbine Cascade
(American Society of Civil Engineers, 2018)Two innovative composite tip structures that combine a honeycomb with a prismoid or spherical bottom have been proposed to actively control the tip leakage flow in a turbine cascade. The mechanisms of inhibiting leakage ... -
Site-Specific Extra-Heavy Truck Load Characteristics and Bridge Safety Assessment
(American Society of Civil Engineers, 2018)Recently, the occurrence frequency of extra-heavy trucks (EHTs, gross weight ≥8 t) in China has significantly arisen due to the increasing demand of heavy freight transportation. Load characteristics, such as traveling ... -
Time-Dependent Deformation and Damage Modeling of a SiC/SiC Composite
(American Society of Civil Engineers, 2018)Time-dependent elevated temperature behavior of a two-dimensional (2D) woven melt-infiltrated Sylramic (SiC) ceramic matrix composite (CMC) is investigated. A micromechanics-based model that includes consideration of matrix ... -
Studying Failure Modes of GFRP Laminate Coupon Specimens Using Scanning Electron Microscopy Technique
(American Society of Civil Engineers, 2018)Fiber-reinforced plastics (FRPs), with their unique material and structural properties, offer many advantages over conventional structural materials such as concrete and steel. However, their brittle failure mechanisms at ... -
Transient Dynamics Research on the Force-Measurement System for Hypersonic Impulse Combustion Wind Tunnel Based on Inertia Compensation
(American Society of Civil Engineers, 2018)The signal detected by a force-measurement system (FMS) is transient in an impulse combustion wind tunnel, and the transient property of the FMS will affect the measurement result significantly. This study presents a method ... -
Finite-Time Fault Estimation and Fault-Tolerant Control for Rigid Spacecraft
(American Society of Civil Engineers, 2018)This paper investigates a fault tolerant problem for the rigid spacecraft in the presence of additive faults and nonlinear disturbances. An adaptive observer and an adaptive terminal sliding mode observer (ATSMO) are ... -
Fault-Tolerant Attitude Determination and Control System Design of Nanosatellite 2
(American Society of Civil Engineers, 2018)Nanosatellite 2 (NS-2) is a science and technology experimental nanosatellite developed by Tsinghua University. Since it was launched, NS-2 has operated properly and has been used as a low-cost, rapid-response satellite ... -
Truck Weight Limit for Simply Supported Steel Girder Bridges Based on Bridge Fatigue Reliability
(American Society of Civil Engineers, 2018)The objective of this study was to present a new approach for determining the truck weight limit of simply supported steel girder bridges. This approach is based on the fatigue reliability of bridge girders under the action ... -
Experimental Study on the Combustion Process in a Scramjet Combustor with a Rear-Wall-Expansion Geometry
(American Society of Civil Engineers, 2018)In this study, experiments were conducted in a Mach 2.92 supersonic flow to investigate the combustion process in an ethylene-fueled model scramjet combustor with a rear-wall-expansion geometry. It is concluded that at low ...