Journal of Aerospace Engineering: Recent submissions
Now showing items 741-760 of 2488
-
Rhombic Laminates with Mass Variations under Dual-Axis Compression
(ASCE, 2020)Biaxial buckling of the laminated composite rhombic (skew) plate with mass variations in the form of openings and adding extra mass at the center of the plate was studied using improved shear deformation theory (ISDT). The ... -
Effects of Inhomogeneous Wind Fields on the Aerostatic Stability of a Long-Span Cable-Stayed Bridge Located in a Mountain-Gorge Terrain
(ASCE, 2020)This study investigates the effects of inhomogeneous wind fields on the aerostatic stability of a long-span cable-stayed bridge, which straddles a typical mountain-gorge terrain. Inhomogeneous wind fields, with featured ... -
Damping Force Analysis and Optimization of a Lunar Lander with MRF
(ASCE, 2020)Controllable lunar landers with magnetorheological fluid (MRF) damper have become a hot topic of research. However, limited research studies have been performed on the damping force analysis of MRF under high-velocity ... -
Computational Evaluation of Aero-Thermodynamic Loads and Effect of Catalyticity in an Arc-Jet Wind Tunnel
(ASCE, 2020)With a view to designing tests in the arc wind tunnel small planetary entry simulator (SPES) at the Department of Industrial Engineering of the University of Naples “Federico II” on specimens of ultra-high-temperature ... -
Impact of Battery Performance on the Initial Sizing of Hybrid-Electric General Aviation Aircraft
(ASCE, 2020)Studies suggest that hybrid-electric aircraft have the potential to generate fewer emissions and be inherently quieter when compared to conventional aircraft. By operating combustion engines together with an electric ... -
3D Profile Reconstruction and Guidance for the Terminal Area Energy Management Phase of an Unpowered RLV with Aerosurface Failure
(ASCE, 2020)This paper focuses on the guidance of an unpowered reusable launch vehicle (RLV) with aerosurface failure in the terminal area energy management (TAEM) phase. The aerosurface failure will limit the bank capability, and has ... -
Temperature Sensing and Hydration Study of Carbon Nanofiber Aggregates
(ASCE, 2020)Fiber research in concrete construction technology has been helping to prevent catastrophic disasters due to the loss of structural integrity and service life by functioning as structural health monitoring (SHM) technology. ... -
Hypervelocity Impact Performance of Biopolymer-Bound Soil Composites for Space Construction
(ASCE, 2020)Establishing a lunar base requires the design and construction of infrastructure that can withstand the Moon’s hazardous environment. This study explores the effects of micrometeoroid impacts on a biopolymer-bound soil ... -
Analysis of Pilot Interaction with the Control Adapting System for UAV
(ASCE, 2020)The control surfaces failures significantly reduce the maneuverability of the aircraft. The problem may appear in every flying platform, and its consequences can lead to a serious accident. To counteract the aircraft’s ... -
Experimental Investigation of Plasma Jet Ignition Characteristics in Kerosene–Air Mixtures
(ASCE, 2020)Ignition and high altitude restarts under extreme conditions have always been key research problems due to low pressure and temperature of inlet air, so reliable ignition and wide ignition boundary is very necessary. In ... -
Aeroelastic Analysis of Laminated Composite Plate with Material Uncertainty
(ASCE, 2020)The involvement of complex manufacturing and fabrication process of composite material has been the main cause of uncertainty. Therefore, the stochastic analysis of flutter characteristics of laminated composite structures ... -
Using Acoustic Emission to Monitor Failure Modes in CFRP-Strengthened Concrete Structures
(ASCE, 2020)Carbon fiber–reinforced polymer (CFRP) composites have been widely used to repair and strength concrete structures. Nevertheless, the durability and long-term performance of FPR-strengthened structures are still not well ... -
Hybrid Diagnosis System for Aeroengine Sensor and Actuator Faults
(ASCE, 2020)This paper presents a hybrid model-based fault diagnosis system to distinguish different types of faults and provide accurate fault information under complex fault situations. In the proposed system, a bank of hybrid fault ... -
Stability and Dynamics Analysis of In-Plane Parametric Vibration of Stay Cables in a Cable-Stayed Bridge with Superlong Spans Subjected to Axial Excitation
(ASCE, 2020)Stay cables are prone to parametric vibrations, which might severely affect the serviceability and safety of cable-stayed bridges. This paper investigates the stability and dynamic characteristics of in-plane parametric ... -
Design, Mathematical Modeling, and Stability of a Reconfigurable Multirotor Aerial Vehicle
(ASCE, 2020)A new design of a reconfigurable multirotor is developed by employing a novel active–passive motor scheme. The scheme is based on quadrotor configuration with four additional motors placed in coaxial setup along a single ... -
Simplified Analysis of Negative Shear Lag in Laminated Composite Cantilever Beam
(ASCE, 2020)In the present study, a composite cantilever beam subjected to shear loading has been analyzed. A simplified procedure is presented to examine the composite cantilever beam. The governing differential equations and boundary ... -
PIV Measurement of Separation Bubble on an Airfoil at Low Reynolds Numbers
(ASCE, 2020)A wind tunnel experiment was conducted to measure the flow over a suction side of a DAE51 airfoil at low Reynolds numbers using particle image velocimetry (PIV). Five chord Reynolds numbers ranging from 39,000 to 118,000 ... -
Shock System Model of Highly Loaded Turbine Cascade
(ASCE, 2020)To support the design of a two-dimensional turbine blade profile with reduced shock loss, an efficient model for shock system with separation shock in highly loaded turbine cascade needed to be established to realize ... -
Aeroelastic Tailoring for Gust-Energy Extraction
(ASCE, 2020)For small fixed-wing aircraft, passive forms of extracting energy from the atmosphere have been shown to have positive improvements on their flight performance. The present work demonstrates the magnitude of performance ... -
Aerodynamic Shape Optimization of a Gas Turbine Engine Air-Delivery Duct
(ASCE, 2020)We discuss a methodology for multiobjective optimization of the U-shaped air-delivery duct, which is a part of a turboprop engine intake system. The methodology combines and extends existing techniques to optimize the ...