Journal of Aerospace Engineering: Recent submissions
Now showing items 1381-1400 of 2488
-
Intelligent Vibration Isolation and Mitigation of a Platform by Using MR and VE Devices
(American Society of Civil Engineers, 2016)The vibration isolation and mitigation of a platform, such as aerospace or precision instrument platforms, is an important research topic. However, previous studies only address high-frequency excitations; they disregard ... -
Active Fault-Tolerant Control of UAV Dynamics against Sensor-Actuator Failures
(American Society of Civil Engineers, 2016)In this paper, an active fault-tolerant flight control system against sensor/actuator failures for unmanned aerial vehicles (UAVs) is proposed. First, an approach to detecting and isolating UAV sensor failures affecting ... -
Equivalent Stress Transformation for Efficient Probabilistic Fatigue-Crack Growth Analysis under Variable Amplitude Loadings
(American Society of Civil Engineers, 2016)A general probabilistic fatigue-crack growth prediction methodology for accurate and efficient damage prognosis is proposed in this paper. The methodology is based on an equivalent stress transformation and the inverse ... -
Smart Monitoring of a Super High Arch Dam during the First Reservoir-Filling Phase
(American Society of Civil Engineers, 2017)The structural behavior during the first reservoir-filling phase is significant for evaluating a super high arch dam’s safety. This paper presents an in situ monitoring network of the Xiluodu Dam in Yunnan, China, including ... -
Numerical Investigation of the Effect of Capsule Half-Cone Angle on a Supersonic Parachute System
(American Society of Civil Engineers, 2016)In this paper, the effects of the capsule half-cone angle on the dynamics of supersonic parachute systems are investigated. The supersonic flow over three-dimensional rigid parachute models are studied by numerically solving ... -
Time-Dependent Second-Order Viscoelastic Fluid Flow on Rotating Cone with Heat Generation and Chemical Reaction
(American Society of Civil Engineers, 2016)The present analysis deals with the study of time-dependent flow of a second-order fluid on a rotating cone in the presence of chemical reaction and heat generation or absorption effects under prescribed heat flux conditions. ... -
Structural Monitoring Techniques for the Largest Excavation Section Subsea Tunnel: Xiamen Xiang’an Subsea Tunnel
(American Society of Civil Engineers, 2017)Because of the particular and complex engineering environment of subsea tunnels, effective monitoring techniques should be adopted to ensure the operation security of subsea tunnels. Also, monitoring the condition of steel ... -
Analytic Approach and Landing Guidance through a Novel Time-Varying Sliding Mode Control Method
(American Society of Civil Engineers, 2016)In this paper, a nonlinear guidance law is developed for the approach and landing (A&L) phase of a reusable launch vehicle (RLV). First, a novel time-varying sliding mode control (TVSMC) technique is introduced. The main ... -
Development of an Orthotropic Elasto-Plastic Generalized Composite Material Model Suitable for Impact Problems
(American Society of Civil Engineers, 2016)The need for accurate material models to simulate the deformation, damage, and failure of polymer matrix composites under impact conditions is becoming critical as these materials are gaining increased usage in the aerospace ... -
One-Dimensional Numerical Framework for Shock Compaction of Cellular Foams
(American Society of Civil Engineers, 2016)A one-dimensional (1D) finite-volume implementation, based on the second-order Godunov method for predicting dynamic response of foams that exhibit irreversible compaction, is presented. Cellular foams, with an upward ... -
Effect of Wing Deformation on the Aerodynamic Performance of Flapping Wings: Fluid-Structure Interaction Approach
(American Society of Civil Engineers, 2016)Wing stiffness is very crucial in augmenting aerodynamic forces in flapping wing flyers. In this work, the effect of wing deformation was studied using three-dimensional numerical analysis (two-way fluid structure interaction), ... -
Investigation of 3D Grain Shape Characteristics of Lunar Soil Retrieved in Apollo 16 Using Image-Based Discrete-Element Modeling
(American Society of Civil Engineers, 2015)This paper describes three-dimensional (3D) grain shape characteristics of returned lunar soil (No. 60501) and its numerical simulation by using the image-based discrete-element method (DEM). First, the lunar soil sample ... -
Effects of Hall Current and Ion Slip in Peristalsis with Temperature-Dependent Viscosity
(American Society of Civil Engineers, 2016)This paper deals with two-dimensional peristaltic flow of a viscous fluid in a symmetric channel for variable temperature-dependent viscosity. The effects of Hall current, ion slip, viscous dissipation, and Ohmic heating ... -
DMT-Based Estimation of Mechanical Properties for Subsurface Lunar Soil Simulant
(American Society of Civil Engineers, 2016)In the third phase of the Chang’E project, a drilling and coring device mounted on a lunar probe will be sent to the moon to acquire samples of lunar soil within a certain depth (subsurface lunar soil). Interaction between ... -
Time-Delayed Vibration Control of a Rotating Flexible Manipulator Based on Model Output Prediction Feedback
(American Society of Civil Engineers, 2016)This paper is concerned with vibration control of a single-link flexible beam structure. The proposed beam is controlled by a servo motor through a harmonic gear reducer. After obtaining the models by system identification, ... -
Observer-Based H2-Robust Controller for Active Vibration Control of Laminated Composite Plates with an Optimally Placed IDE-PFC Actuator
(American Society of Civil Engineers, 2016)An attempt is made in this work to develop an observer-based modal -
Multiscale Method for Geometrical Nonlinear Analysis of Fluid Actuated Cellular Structures with Arbitrary Polygonal Microstructures
(American Society of Civil Engineers, 2016)Fluid actuated cellular structures are morphing structures inspired by the nastic movement of plants. These materials have a wide array of applications from morphing aircraft wings to soft robotics. The nonlinear shape-morphing ... -
Commercial Simulator Applications in Flight Test Training
(American Society of Civil Engineers, 2016)Three different applications of a commercially available desktop flight simulator were demonstrated in flight test training. The first case examined the visual reproduction of spins executed at National Research Council ... -
Mechanical Analysis of a Pin Interference-Fitted Sheet under Tensile Loading
(American Society of Civil Engineers, 2016)Interference fit can lead to better fatigue behavior of mechanical fastened joints. To explore the fatigue enhancement mechanism of interference fit, an analytical model of an interference-fit pinned sheet under subsequent ... -
Sensor Fault Diagnosis for Structural Health Monitoring Based on Statistical Hypothesis Test and Missing Variable Approach
(American Society of Civil Engineers, 2017)Using structural monitoring data collected from a sensor network to assess the health condition of a monitored structure relies on the accurate operation of the sensors and therefore could be affected by various sensor ...