Show simple item record

contributor authorP. R. K. Murti
date accessioned2017-05-09T01:39:04Z
date available2017-05-09T01:39:04Z
date copyrightJuly, 1974
date issued1974
identifier issn0742-4787
identifier otherJOTRE9-28576#361_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/165279
description abstractThe dynamic behavior of squeeze film in a narrow porous journal bearing under a cyclic load is analyzed. A thin-walled bearing with a nonrotating journal is considered and a closed form expression for the pressure distribution is derived. The locus of the journal center is found by numerical methods and it is established with an example that actual contact between the journal and bearing can be avoided by appropriate design of the bearing. Consequently, it is proved that pure squeeze films have a load capacity only under cyclic loads. The analysis also reveals that the permeability of the bearing material and the wall thickness of the bearing influence significantly the operating eccentricity ratio.
publisherThe American Society of Mechanical Engineers (ASME)
titleDynamic Behavior of Pure Squeeze Films in Narrow Porous Bearings
typeJournal Paper
journal volume96
journal issue3
journal titleJournal of Tribology
identifier doi10.1115/1.3451964
journal fristpage361
journal lastpage364
identifier eissn1528-8897
keywordsBearings
keywordsStress
keywordsPressure
keywordsPermeability
keywordsDesign
keywordsNumerical analysis
keywordsWall thickness AND Journal bearings
treeJournal of Tribology:;1974:;volume( 096 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record