Show simple item record

contributor authorZhang, Tao
contributor authorPei, Gang
contributor authorZhu, Qunzhi
contributor authorJi, Jie
date accessioned2017-05-09T01:33:07Z
date available2017-05-09T01:33:07Z
date issued2016
identifier issn0199-6231
identifier othersol_138_04_044501.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/162480
description abstractVolumefilling ratio of the working fluid has a predominant effect on the system performance of a closed twophase solar waterheating (SWH) system. To study this effect, a prototype of a loop thermosyphon SWH system, which uses remolded flatplate solar collector as the evaporator and the coil pipe in the water tank as the condenser, was set up. A set of longterm outdoor experiments under 10%, 20%, 30%, 50%, and 70% volumefilling ratios were conducted in this paper. R600a was used as working fluid. Loop thermosyphon solar collector thermal performance and system thermal performance under different volumefilling ratios, including the temperature distribution of loop thermosyphon evaporator, were presented. It is shown that the loop thermosyphon solar collector and the system had a better thermal performance than the conventional ones under 30% and 50% volumefilling ratio, and the loop thermosyphon evaporator had an even temperature distribution when the volumefilling ratio was higher than 30%. The optimum volume filing ratio lies in between 30% and 50% of the whole system volume.
publisherThe American Society of Mechanical Engineers (ASME)
titleInvestigation on the Optimum Volume Filling Ratio of a Loop Thermosyphon Solar Water Heating System
typeJournal Paper
journal volume138
journal issue4
journal titleJournal of Solar Energy Engineering
identifier doi10.1115/1.4033403
journal fristpage41006
journal lastpage41006
identifier eissn1528-8986
treeJournal of Solar Energy Engineering:;2016:;volume( 138 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record