Show simple item record

contributor authorGoparaju, Kalyan
contributor authorGaitonde, Datta V.
date accessioned2017-05-09T01:29:40Z
date available2017-05-09T01:29:40Z
date issued2016
identifier issn0098-2202
identifier otherfe_138_07_071101.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/161391
description abstractJet flow control is important for mixing enhancement and noise mitigation. In previous efforts, we have used validated simulations to examine the effect of localized arc filament plasma actuators (LAFPA) on perfectly expanded Mach 1.3 jets. Here, we extend the analysis to an underexpanded jet at the same Mach number to examine the effect of shocks and expansions on control authority. After validation of the baseline flow, it is shown that the downstream evolution is relatively independent of Reynolds number. Simulations performed at different values of upstream pressure indicate that the higher stagnation pressure yields shock cells that are quantitatively stronger but qualitatively similar to those observed for the lower upstream stagnation pressure condition. For control simulations, axisymmetric mode pulsing is considered at two different Strouhal numbers of St = 0.3 and St = 0.9. These simulations show that the response of the jet to flow control is a strong function of the actuation frequency. Relative to the nocontrol case, actuating at the columnmode instability frequency (St = 0.3) results in an increase in the rate of spreading of the shear layer. Phaseaveraged results indicate the formation of large toroidal vortices formed as a result of amplification of the columnmode instabilities that are excited at this frequency. On the other hand, the higher frequency actuation affects the initial shearlayer instability and interferes with the formation of the largescale structures. Detailed integral azimuthal length scale analyses reveal that despite the absence of the axisymmetric toroids, the St = 0.9 case shows the dominance of the axisymmetric mode even at large distances from the nozzle exit. This indicates that flow control methods need not always have a visual signature of their influence on the system.
publisherThe American Society of Mechanical Engineers (ASME)
titleLarge Eddy Simulation of Plasma Based Active Control on Imperfectly Expanded Jets
typeJournal Paper
journal volume138
journal issue7
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.4032571
journal fristpage71101
journal lastpage71101
identifier eissn1528-901X
treeJournal of Fluids Engineering:;2016:;volume( 138 ):;issue: 007
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record