Show simple item record

contributor authorG. B. Wallis
contributor authorD. A. Sullivan
date accessioned2017-05-09T01:29:34Z
date available2017-05-09T01:29:34Z
date copyrightDecember, 1972
date issued1972
identifier issn0098-2202
identifier otherJFEGA4-27401#788_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/161366
description abstractThis paper describes an experimental investigation of two-phase, air-water nozzle flows including critical or choked flow. Five different nozzle geometries were used. The nozzles exhausted to atmospheric pressure from stagnation pressures of 16 to 55 psia. The quality (mass fraction of air flowing) ranged from 2 to 35 percent. A feature of the study was the injection system which was designed to minimize the entrainment of liquid into the gas phase. The data were found to be described within about 10 percent by modifying separated flow theory by a simple “blockage factor” correlation.
publisherThe American Society of Mechanical Engineers (ASME)
titleTwo-Phase Air-Water Nozzle Flow
typeJournal Paper
journal volume94
journal issue4
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.3425554
journal fristpage788
journal lastpage794
identifier eissn1528-901X
keywordsFlow (Dynamics)
keywordsNozzles
keywordsWater AND Atmospheric pressure
treeJournal of Fluids Engineering:;1972:;volume( 094 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record