Show simple item record

contributor authorUzunlar, Erdal
contributor authorSchwartz, Jared
contributor authorPhillips, Oluwadamilola
contributor authorKohl, Paul A.
date accessioned2017-05-09T01:27:29Z
date available2017-05-09T01:27:29Z
date issued2016
identifier issn1528-9044
identifier otherep_138_02_020802.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/160812
description abstractPolymers can be used as temporary place holders in the fabrication of embedded air gaps in a variety of electronic devices. Embedded air cavities can provide the lowest dielectric constant and loss for electrical insulation, mechanical compliance in devices where lowforce deformations are desirable, and can temporarily protect movable parts during processing. Several families of polymers have been used as sacrificial, templating polymers including polycarbonates, polynorbornenes (PNBs), and polyaldehydes. The families can be distinguished by chemical structure and decomposition temperature. The decomposition temperature ranges from over 400 آ°C to below room temperature in the case of low ceiling temperature polymers. Overcoat materials include silicon dioxide, polyimides, epoxy, and bisbenzocyclobutene (BCB). The methods of airgap fabrication are discussed. Finally, the use of photoactive compounds in the patterning of the sacrificial polymers is reviewed.
publisherThe American Society of Mechanical Engineers (ASME)
titleDecomposable and Template Polymers: Fundamentals and Applications
typeJournal Paper
journal volume138
journal issue2
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4033000
journal fristpage20802
journal lastpage20802
identifier eissn1043-7398
treeJournal of Electronic Packaging:;2016:;volume( 138 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record